Clipsal Wiser IP Camera Wi-Fi, Outdoor, IP56
Item Number: CLP724419
The Wiser Outdoor IP Camera provides day and night HD video recording, with wide angle view, motion detection notification alerts, intercom and event or continuous recording. Simple and intuitive control via the Wiser by SE App from anywhere. Use standalone or integrate into the Wiser smart home system and Automations. With adjustable camera position and IP56 protection, it can be installed on a wall or ceiling/eave to suit any home.
Datasheet
Specifications
Design
Product brand
Range
Product or component type
Device application
Colour tint
Physical
Power consumption in w
Communication network type
Integrated connection type
Communication port protocol
Length
Operating distance
Function available
Type of installation
Height
Net weight
Ip degree of protection
Ambient air temperature for operation
Ambient air temperature for storage
Relative humidity
Product certifications
Reach regulation
Eu rohs directive
Mercury free
Rohs exemption information
China rohs regulation
Environmental disclosure
Circularity profile
Material
Device composition
Material
Others
Package 1 bare product quantity
Concentrator compatibility
Mobile app name
Main colour tint
[us] rated supply voltage
Maximum supply current
Network type
Data storage equipment
Bandwidth
Maximum number of supported devices
Technology type
Size
Pixel resolution
View angle horiz x vert
Audio system control module type
Audio video coding standard
Display resolution
Transmission rate
Camera frame rate
Data recording
Encryption protocol
Diameter
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Unit type of package 3
Number of units in package 3
Package 3 height
Package 3 width
Package 3 length
Package 3 weight
Scip number
Take-back
Product contributes to saved and avoided emissions
Removable battery
Documents & downloads
hide show-
All
-
Technical Data Catalogues
-
Other technical guide
-
End of Life Manual
-
Environmental Disclosure
-
Installation Instruction
-
System User Guide
-
Operating Manuals
-
Certificates (MSDS)
Frequently Asked Questions
hide showNOTE – If there is loss of power to the Wiser Camera this will stop the recording which will continue upon powering back up.
Then ensure the IP camera is being connected to 2.4GHz on the Wi-Fi router, noting the Camera operates on 2.4GHz only. If unsure, check the WiFi router settings to see whether ‘Band Steering’ is enabled or not. This should be disabled as it may attempt to force a 5.0GHz WiFi network to the camera rather than the 2.4Ghz.”
Make sure WiFi has access to the internet, this can be done by disabling mobile data and testing a video or web page.
If EZ Mode pairing is not working, try using QR mode to pair the camera. Tap “EZ Mode” in the top right corner of the screen to change pairing mode.
Once this has been taken note of begin by power cycling your Wiser Hub. This can be done by removing the micro-USB where it connects to the Hub or by turning off the power outlet that supplies power to the Hub. Leave it off for 10 – 15 seconds and then reconnect the Wiser Hub and wait until it completes its reboot procedure at the end of which only 2 LED indicators should be visible on the Wiser Hub. With LEDs at top of Hub - if connected with Ethernet cable (Right and Left Led will turn ON). If connect via WiFi (Middle and Right Led will turn ON)
If this fails to resolve the issue the product failing to respond may need to be power cycled itself. If confidant and able, access the switchboard that has the RCBO’s or Circuit breakers that supply power to the products. Turn the applicable supply off for 10 – 15 seconds and then turn this supply back on.
Note: If uncertain contact your installing electrician for the Wiser system who may advise what is supplying power to the Wiser products. If fuses are installed in your switchboard it is recommended to have your electrician remove the fuse and then re-fit after 10 – 15 seconds. Fuses can be extremely dangerous if not correctly handled by a qualified electrician.
If the switches are still unresponsive contact Tech Support via phone – Australia: 13 73 28 (13 SEAU) New Zealand 0800 652 999, email - techsupport.pz@se.com or via online chat through a link on our support page https://www.clipsal.com/clipsal-support/contact-us or https://www.pdl.co.nz/support