Standard Series, Single Switch Socket Outlet, 250V, 10A, Standard Size, Vertical White Electric

 

5041NMML/5041NMS - doesn’t come with a push button assembly Blank

 

5041NMML Clipsal 40 Series C-Bus Master Module

 

 

5041NMS-Clipsal C-Bus 40 SERIES Slave Push Button Mech

 

 

5041NMS does not  come with a push button cap,  need to purchase separately

 

 

40APB(Standard PushButton)

  S40APB(style color range)  or
 E40APB (essence style range)- for marking then it will be a special order

 

It is not recommended to use step-up transformer on ATS48/ATS480 output.

Instead of ATS, the suggestion is to use VSD + Sinus filter + step up transformer combination for this requirement.

The dv/dt output voltage of the ATS48/ATS480 will be the cause of current and voltage oscillations and overvoltages.

Thyristors can burn in overvoltage and the insulation of the motor has to be high enough.

The magnetic saturation of the transformer will cause overcurrents which will damage the thyristors.

In case of micro cut of the main supply, overcurrent will appear.

 

The part number for a 3 phase, 20Amp RCBO is a 4RCBE420/30.

Specifications

Supply Voltage	415 V AC
Rating	20A
Fault Current	6000A
Sensitivity	30mA
Poles	3P+N
Type	Type A
Pole Width	5 Modules (18mm × 5)
Curve Type	C - Curve
Top or Bottom Fed	Both
IP Rating	IP20
Mount	Din-Rail (Double Locking Clip)
Indicator	Positive Contact and Red Flag
Certification	Approval to AS/ NZS 61009.1:2015

For further information please visit https://www.clipsal.com/products/detail?catno=4RCBE420/30&tab-document-1=0


 

Issue:

Can use the 2P iC60 (N or H) MCB for 400V application measuring 400V across phase to Neutral?

Product Line:

Acti 9

Environment:

iC60 (N or H)

Resolution:

Yes, MCBs Acti9 iC60N/H 2P can be used under Ue (Ph/N) or (Ph/Ph)=400Vac applications.
You can refer to breaking capacities declared in catalogue pages for Ue=380-415Vac (e.g Icu=10kA for iC60N 2P C 40A including ref.A9F44240).

The alternative replacement for NS630H with STR23SE trip unit is the new offer Compact NSX new Generation C63H32D630.

C63H32D630

Circuit breaker, ComPacT NSX630H, 70kA/415VAC, 3 poles, MicroLogic 2.3 trip unit 630A

Issue:
N/A

Product Line:
Altistar 48

Environment:
Altistart 48

Cause:
N/A

Resolution:
ATS48 has a control supply and a power supply.

On  the Y range, you have a control supply that is 110-220 and the power supply is 208-690V. Y range is dedicated for the US market, with NEC standard soft starter that must be protected against the current unbalance.  Y range has three current sensors,. There are only 2 on the Q range (one more OLF on the Y range).

On Q range, the control supply is 220-415V and the power supply is 230-415V.
 

The default settings of UA controller for automatic transfer of circuit breaker is listed in the table. 
 

Dip Switch settings

Dip Switch	240VAC	415VAC
A	0	1
B	1	1
C	0	0

Dip switch A is Voltage dependent. 

Refer to user manual for further information - https://www.se.com/au/en/download/document/51201113AA/

The replacement for CA2DN31E7 is CAD32E7

CAD32E7 has 48V AC coil.

Other coil voltages are :

AC = 24V-B7, 32V-C7, 48V-E7, 110V-F7, 220-M7, 240V-U7, 415V-N7

DC = 12V-JD, 24V-BD, 48V-ED, 110V-FD, 220V-MD

 

The differences between the iC60N and iC60H series of circuit breakers is the iC60N has a breaking capacity of 6kA at 240/415V, C Curve in accordance with AS/NZS60898.1, where as the iC60H has a breaking capacity of 10kA at 240/415V B, C & D Curve in accordance with AS/NZS60898.1.

In Australia the iC60N is only available in C Curve where as the iC60H is available in B, C & D Curve.
 
iC60N & iC60H Dimensions

Connection: Tunnel terminals for the following cables
For further information please visit https://www.schneider-electric.com.au/en/product-subcategory/1605-acti-9-miniature-circuit-breakers---mcbs/


 

Issue:
Contact Rating of 9013F Pressure Switches

Product Line: 
Pressure, vacuum and Float Switches 

Environment:
9013 Type F Pressure Switch 

Resolution:
Those contacts have a control circuit rating of A600.
They are DC rated at 1/4 HP at 115V and 230V (Except form M4)
They are Single Phase AC rated 1 1/2 HP at 115V, 2 HP at 230V
They are Polyphase rated 2 HP at 115V, 3 HP at 230V, and 1 HP at 460/575V.

This also applies to the 9013 FHG2, 9, 12, 13, 44, 49 9013 FSG, and FSW.

The Altivar 71 Drive Braking IGBT operates when the value of DC Bus Voltage is higher than the DC Bus Threshold Voltage OBR. When the value of the DC Bus Voltage is lower than the threshold voltage (Unom_max + 10%), the Braking IGBT/Transistor is switched off.

The Voltage Threshold Values for a Drive working on 220VAC or 415VAC, 3Phase is provided in the attachment.

Note:

OBR is the threshold point where the Braking Transistor switches ON and Unom_max + 10% is the threshold point where the Braking Transistor switches OFF.

Firstly Choose from the two types of relays, (DIN rail mount or Front-panel mount) Using the tables below.
Then make a selection dependent on the voltage required along with the settings desired.


Vigirex Earth Leakage Protection Relay (DIN rail mount)

TYPE	POWER SUPPLY	SETTINGS	REFERENCE
RH21M	12 to 24V AC- 12 to 48V DC	30mA-Inst, 300mA-Insta or 300mA-60ms	56160
	48V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56161
	110 to 130V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56162
	220 to 240V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56163
	380 to 415V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56164
	440 to 525VAC	30mA-Inst, 300mA-Insta or 300mA-60ms	56165
RH99M	12 to 24V AC- 12 to 48V DC	30mA to 30A- Inst to 4.5s	56170
	48V AC	30mA to 30A- Inst to 4.5s	56171
	110 to 130V AC	30mA to 30A- Inst to 4.5s	56172
	220 to 240V AC	30mA to 30A- Inst to 4.5s	56173
	380 to 415V AC	30mA to 30A- Inst to 4.5s	56174
	440 to 525V ac	30mA to 30A- Inst to 4.5s	56175

Vigirex Earth Leakage Protection Relay (Front-Panel mount)

TYPE	POWER SUPPLY	SETTINGS	REFERENCE
RH21P	12 to 24V AC- 12 to 48V DC	30mA-Inst, 300mA-Insta or 300mA-60ms	56260
	48V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56261
	110 to 130V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56262
	220 to 240V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56263
	380 to 415V AC	30mA-Inst, 300mA-Insta or 300mA-60ms	56264
	440 to 525VAC	30mA-Inst, 300mA-Insta or 300mA-60ms	56265
RH99P	12 to 24V AC- 12 to 48V DC	30mA to 30A- Inst to 4.5s	56270
	48V AC	30mA to 30A- Inst to 4.5s	56271
	110 to 130V AC	30mA to 30A- Inst to 4.5s	56272
	220 to 240V AC	30mA to 30A- Inst to 4.5s	56273
	380 to 415V AC	30mA to 30A- Inst to 4.5s	56274
	440 to 525V ac	30mA to 30A- Inst to 4.5s	56275
RHU	220 to 240V AC	15mA to 30A- Inst to 5s	28560(1)

Then choose a Toroidal to suit:
Vigirex Sensors (Toroidal and rectangular)

TYPE	DESCRIPTION	DIMENSION	RATED OPERATIONAL CURRENT	REFERENCE
Closed Toroid,A-type	TA30	30mm	65A	50437(2)
	PA40	50mm	85A	50438(2)
	IA80	80mm	160A	50439
	MA120	120mm	250A	50440
	SA200	200mm	400A	50441
	GA300	300mm	630A	50442
Split Toroid, OA-type	POA	46mm	85A	50485
	GOA	110mm	250A	50486
Rectangular Sensors	Small Rectangular Sensors	280 x 115mm	1600A	56053(3)
	Large Rectangular Sensors	470 x 160mm	3200A	56054(3)

For further information please visit https://www.se.com/au/en/product-range/1014-vigirex/?parent-subcategory-id=4250




 

Parts that should be supplied as follows:

KITPARKING22-1:
A9F54440 x 1, MCB, iC60H 4P 40A C Curve
A9Z51440 x 1, RCD, iIDP 4P 40A 30mA Type B, 400V
A9A26969 x 2, Under voltage release, iMNX 220 240VAC
A9F44204 x 1, MCB, iC60N 2P 4A C Curve
A9R91240 x 1, RCCB, iID 2P 40A 30mA Type Asi
A9A26924 x 2, Aux contact, iOF 240 415VAC 24 130VDC

KITPARKING22-2:
A9F54440 x 2, MCB, iC60H 4P 40A C Curve
A9Z51440 x 2, RCD, iIDP 4P 40A 30mA Type B, 400V
A9A26969 x 3, Under voltage release, iMNX 220 240VAC
A9F44204 x 1, MCB, iC60N 2P 4A C Curve
A9R91240 x 1, RCCB, iID 2P 40A 30mA Type Asi
A9A26924 x 4, Aux contact, iOF 240 415VAC 24 130VDC
 

Issue:

In North America, one would expect to see approximately 120 volts when
measuring from hot to neutral and from hot to ground. However, large ships
use delta power. That is, there are two hot legs (center tapped 120Vac) and a
ground: no neutral. Each hot is 60 volts. One can measure from hot to hot
(phase to phase) and will see 120 volts. When measuring from either hot to
ground, one will see 60 volts.


Product Line:

Smart-UPS

Environment:

All models with the "X93" suffix (IE: SU700X93, SUA1500X93)

Cause:

Standard North American Smart-UPS are designed for a 3 wire input comprised of a 120v Hot, Neutral, and Ground.


Resolution:

For this environment, APC has the Smart-UPS X93 Shipboard Series. A standard
120Vac model should not be used on a ship with delta power. When a 120Vac
APC UPS transfers to battery, it supplies 115V +/-5V on the hot leg. Herein
lies the problem with standard models on ships. According to the National
Electric Code, the neutral leg must be passed through the standard UPS
units without interruption. As a result, it is possible that 180Vrms may be
passed to the load when switching to battery (120Vac from the UPS inverter on
one phase and 60 volts from the ship on the second phase). Most computers have
power supplies that accept a wide range of input voltage; therefore, they would
not be affected by the voltage jump. However, if the load has any common mode
suppression (i.e. 150Vac MOVs), then the load may be affected.



Input to the X93 units is two hot legs at 60Vac each. The output is one hot
120Vac leg, a neutral and a ground. The primary differences between the X93
unit and the domestic are that the site wiring fault circuit is disabled, a
double pole breaker replaces the single pole breaker at the input, and a triple
pole switch is added that can disconnect the incoming AC as well as the bias
supplies in the UPS (it won't turn on anymore). The X93 does not break both
line and neutral unless the input breaker is tripped. If it just goes to
battery, the output and input neutral are still continuous. The ground and
neutral are not connected by the UPS so unless the neutral is bonded to ground
on the ship at the supply or load, one will not necessarily measure 0 volts from
neutral to ground at the output of the UPS.



Note: A customer who has decided to use a domestic model on a ship producing
delta power aware that  the ship must have over current protection (fuse or circuit breaker)
in each hot leg. This is because a fault within the UPS (highly unlikely) from neutral
(whichever hot leg corresponds to the neutral) to ground is not protected by
the UPS's circuit breaker. Without this branch protection on the ship, such a
fault within the UPS could be dangerous because fault current is not limited.

The replacement model for a NS100N 3 Pole is the NSX100F 3P range.

NSX100F: (36kA at 415V)
Complete/3 Pole Front Connected

Description	Type	Trip Unit	Rating	Part Number
NSX100F (36kA) Distribution Protection	Standard thermal-magnetic trip unit TM-D	TM16D	11-16A	LV429637
		TM25D	17-25A	LV429636
		TM32D	22-32A	LV429635
		TM40D	28-40A	LV429634
		TM50D	35-50A	LV429633
		TM63D	44-63A	LV429632
		TM80D	56-80A	LV429631
		TM100D	70-100A	LV429630
	Electronic Trip unit Micrologic 2.2 (LSol)	40A	18-40A	LV429772
		100A	40-100	LV429770
	Electronic Trip unit Micrologic 5.2A (LSI) (ammeter)	40A	18-40A	LV429882
		100A	40-100	LV429880
NSX100F (36kA) Motor Protection	Nagnetic only trip Unit MA	MA2.5	2.5A, 0.75kW	LV429745
		MA6.3	6.3A, 2.2kW	LV429744
		MA12.5	12.5A, 5.5kW	LV429743
		MA25	25A, 11kW	LV429742
		MA50	50A, 22kW	LV429741
		MA100	100A, 45kW	LV429740
	Electronic Trip unit Micrologic 2.2 (LSol)	25A	12-25A, 11kW	LV429828
		50A	25-50A, 22kW	LV429827
		100A	50- 100A, 45kW	LV429825

There is also a 4P model as well.

Please see link to Product guide - http://www2.schneider-electric.com/resources/sites/SCHNEIDER_ELECTRIC/content/live/FAQS/297000/FA297893/pl_PL/CROSSFER%20NS%20TO%20NSX.pdf
 

There are 3 versions of XRG: 
- 115/127V AC (Reference Number - 50281)
- 220/240V AC (Reference Number - 50282)
- 380/415V AC (Reference Number - 50283). 

The high voltage version could be used in lower voltage network. 

For example, the 50283 could be used in network which has L-N voltage 115. 

However, the low voltage version could not be used in high voltage network.