Datasheet
Close
Specifications
Design
Range
Clipsal
Product brand
Clipsal
Sustainable offer status
Green Premium product
Physical
Reach regulation
Reference contains Substances of Very High Concern above the threshold
Eu rohs directive
Compliant with Exemptions
Rohs exemption information
Yes
China rohs regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental disclosure
ENVPEP2106012
Circularity profile
ENVEOLI2106012
Others
Package 1 bare product quantity
1
Package 2 bare product quantity
10
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
3.3 cm
Package 1 width
7.8 cm
Package 1 length
12 cm
Package 1 weight
72 g
Unit type of package 2
BB1
Number of units in package 2
10
Package 2 height
14 cm
Package 2 width
12 cm
Package 2 length
15.8 cm
Package 2 weight
814 g
Documents & downloads
hide showFilter items
-
All
-
Technical Data Catalogues
-
Environmental Disclosure
-
Specification Guide
-
Certificates (MSDS)
ZIP
Clipsal, 15 and 2015 series socket outlets, Certificate, RCM, ULNZ LTD
VERSION
1.0
DATE
03 Apr 2024
REVISION
1.0
DOWNLOAD (ZIP) 232.7 KB
ZIP
CA_GMA-506848-EA--15S, 15L, BSL15LA, BSLS15LA series
VERSION
1.1
DATE
04 Mar 2024
REVISION
1.1
DOWNLOAD (ZIP) 292 KB
ZIP
CA_GMA-506849-EA--15,16F, 2015 Series
VERSION
1.1
DATE
04 Mar 2024
REVISION
1.1
DOWNLOAD (ZIP) 297.1 KB
Frequently Asked Questions
hide show
Issue:
How to change IP address on EGX150
Product Line:
Enerlin'X
Environment:
Link
Resolution:
You can change the IP address on Link 150 web server, go to settings page and then go to IP Configuration tab to change the IP address, please attached screenshot from the Link 150 user guide and screenshot from the web interface page.
How to change IP address on EGX150
Product Line:
Enerlin'X
Environment:
Link
Resolution:
You can change the IP address on Link 150 web server, go to settings page and then go to IP Configuration tab to change the IP address, please attached screenshot from the Link 150 user guide and screenshot from the web interface page.
Somove safety password can be reset by code 1581.
1581 is not the general password to enter in the safety configuration. But a password to allow reset of safety password.
If you enter 1581 from the configure button you will have error message and that is normal.
To use the 1581 password you need to use the reset password button.
Enter here the 1581 and validate the safety password erasing.
Now you can go on "configure" button and it will ask you a new password to open the safety configuration.
1581 is not the general password to enter in the safety configuration. But a password to allow reset of safety password.
If you enter 1581 from the configure button you will have error message and that is normal.
To use the 1581 password you need to use the reset password button.
Enter here the 1581 and validate the safety password erasing.
Now you can go on "configure" button and it will ask you a new password to open the safety configuration.
Issue:
How can the motor operate above 60Hz in the ATV31 or ATV312 drives?
Product Line:
ATV31 ATV312
Environment:
All
Cause:
Changing high speed / max frequency
Resolution:
Parameter HSP determines the maximum speed the drive can operate. Parameter tFr determines the maximum value that HSP can be adjusted.
By default, tFr is set to 60Hz. When changing the Motor Frequency - bFr this changes tFr to 72Hz.
To increase the maximum speed above 72Hz - Go to the drc menu and Set parameter tFr. This can be adjusted up to 500Hz. After saving the change, go to the SEt menu > HSP and adjust up to the desired speed.
If your motor is a specialty motor that is rated for a frequency other than 50Hz. or 60Hz. such as a 300Hz. rated spindle motor, change parameter FrS under the DRC menu to match the rated frequency of the motor.
How can the motor operate above 60Hz in the ATV31 or ATV312 drives?
Product Line:
ATV31 ATV312
Environment:
All
Cause:
Changing high speed / max frequency
Resolution:
Parameter HSP determines the maximum speed the drive can operate. Parameter tFr determines the maximum value that HSP can be adjusted.
By default, tFr is set to 60Hz. When changing the Motor Frequency - bFr this changes tFr to 72Hz.
To increase the maximum speed above 72Hz - Go to the drc menu and Set parameter tFr. This can be adjusted up to 500Hz. After saving the change, go to the SEt menu > HSP and adjust up to the desired speed.
If your motor is a specialty motor that is rated for a frequency other than 50Hz. or 60Hz. such as a 300Hz. rated spindle motor, change parameter FrS under the DRC menu to match the rated frequency of the motor.
Product Line:
Panel Server
Environment:
PAS600 and PAS800
Resolution:
Panel Server
Environment:
PAS600 and PAS800
Resolution:
- Is wireless accessible in this configuration?
There are two wireless networks in Panel server one is IEEE 802.15.4(to communicate with downstream devices like Power Tags etc. that support this protocol) and other one is Wi-Fi. Please see below architecture
2-Can wireless function be disabled?
By default both IEEE802.15.4 and Wi-Fi is disabled in the Panel server. It can be enabled or disabled (temporarily) by going through the webpage of the panel server(See attached PDF document)
But If they want to permanently disable the IEEE 802.15.4 and Wi-Fi Please see below. By doing this both IEEE 802.15.4 and Wi-Fi will be permanently disabled.
It is permanent and cannot be undone. Neither a factory reset nor a backup restore can activate the radio capabilities again.
This feature is available from Firmware version 001.005.000 and onwards
Issue:
Do Altivar 61 and Altivar 71 electronic boards have conformal coating?
Product Line:
Altivar ATV61 and ATV71
Environment:
NA
Cause:
Needs to know if you can order the ATV61 ATV71 drive with conformal coating?
Resolution:
The Conformal Coating is standard on:
These products are treated for increased protection for dusty and corrosive environments. With this coating, exposed copper is tinned, circuit boards are conformal coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils.
The ATV61 and ATV71 drives are designed for maximum ambient pollution as follows:
ATV71:
H...M3, 71HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
HD18M3X to HD75M3X, HD22N4 to HC50N4 are Degree 3 conforming to IEC/EN 61800-5-1
ATV61:
H...M3, HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
HD18M3X to HD90M3X, HD22N4 to HC63N4 are Degree 3 conforming to IEC/EN 61800-5-1
Do Altivar 61 and Altivar 71 electronic boards have conformal coating?
Product Line:
Altivar ATV61 and ATV71
Environment:
NA
Cause:
Needs to know if you can order the ATV61 ATV71 drive with conformal coating?
Resolution:
The Conformal Coating is standard on:
| Part Number | Description | |
| ATV61HC40N4 | ATV61 400KW 600HP 480V 3PH EMC | |
| ATV61HC50N4 | ATV61 500KW 700HP 500V 3PH EMC | |
| ATV61HC63N4 | ATV61 630KW 900HP 480V 3PH EMC | |
| ATV71HC31N4 | ATV71 480V 315KW 500HP EMC | |
| ATV71HC40N4 | ATV71 480V 400KW 600HP EMC | |
| ATV71HC50N4D | ATV71 480V 500KW 700HP EMC w/o choke | |
| ATV71HC50N4 | ATV71 480V 500KW 700HP EMC | |
These products are treated for increased protection for dusty and corrosive environments. With this coating, exposed copper is tinned, circuit boards are conformal coated in critical areas and plastics are treated to better withstand the corrosive nature of certain oils.
The ATV61 and ATV71 drives are designed for maximum ambient pollution as follows:
ATV71:
H...M3, 71HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
HD18M3X to HD75M3X, HD22N4 to HC50N4 are Degree 3 conforming to IEC/EN 61800-5-1
ATV61:
H...M3, HD11M3X, HD15M3X, H075N4 to HD18N4 are Degree 2 conforming to IEC/EN 61800-5-1
HD18M3X to HD90M3X, HD22N4 to HC63N4 are Degree 3 conforming to IEC/EN 61800-5-1
Issue:
Looking for ATV12 information
Product Line:
Altivar 12
Environment:
All models and serial numbers
Cause:
Information is needed for installation and programming.
Resolution:
User manual is document number BBV28581. This manual includes instructions for installing the drive, connecting the control wiring, programming and troubleshooting.
https://www.schneider-electric.us/en/download/document/BBV28581/
Looking for ATV12 information
Product Line:
Altivar 12
Environment:
All models and serial numbers
Cause:
Information is needed for installation and programming.
Resolution:
User manual is document number BBV28581. This manual includes instructions for installing the drive, connecting the control wiring, programming and troubleshooting.
https://www.schneider-electric.us/en/download/document/BBV28581/
Issue:
Can new accessories be used on older style contactors
Product Line:
IEC contactors and starters
Environment:
Pre-Tesys Contactors
Cause:
Identifying product compatibility
Resolution:
Yes, all front mount D2 and Tesys series auxiliary modules are backward forward compatible.
Can new accessories be used on older style contactors
Product Line:
IEC contactors and starters
Environment:
Pre-Tesys Contactors
Cause:
Identifying product compatibility
Resolution:
Yes, all front mount D2 and Tesys series auxiliary modules are backward forward compatible.
Issue:
Auxiliary contact modules for the LC1D and LC2D contactors
Product Line:
Contactor and Starters - IEC
Environment:
North American Products
Resolution:
Select based on application requirements. Please note that the TeSys and Pre-TeSys auxiliary blocks are backward/forward compatible.
Front Mounting; maximum of 1 block per contactor:
N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
--1-----------1---------LADN11-----------LA1DN11
--1-----------1---------LADN11G---------LA1DN11G (See Footnote 1)
--1-----------1---------LADN11P---------LA1DN11P (See Footnote 1)
--2-----------0---------LADN20-----------LA1DN20
--2-----------0---------LA1DX20---------LA1DX20 (See Footnote 2)
--2-----------0---------LA1DY20---------LA1DY20 (See Footnote 3)
--0-----------2---------LADN02-----------LA1DN02
--2-----------2---------LADN22-----------LA1DN22
--2-----------2---------LADN22G---------LA1DN22G (See Footnote 1)
--2-----------2---------LADN22P---------LA1DN22P (See Footnote 1)
--2-----------2---------LADC22------------LA1DC22 (See Footnote 4)
--3-----------1---------LADN31------------LA1DN31
--3-----------1---------LA1DZ31----------LA1DZ31 (See Footnote 5)
--1-----------3---------LADN13------------LA1DN13
--4-----------0---------LADN40------------LA1DN40
--4-----------0---------LA1DZ40-----------LA1DZ40 (See Footnote 6)
--0-----------4---------LADN04------------LA1DN04
Front Mounting; maximum of 1 block per contactor: For use with D2 Series 25 amp through 80 amp contactors and TeSys Series 40 amp through 80 amp only.
N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
--1-----------0--------LADN10----------LA1DN10
--0-----------1--------LADN01----------LA1DN01
Side Mounting; maximum of 1 block on each side for D2 Series and Tesys Series 40 through 80 amp contactors. Tesys 9 through 32, 115, and 150 amps contactors will accept 1 block and is limited to left side only. (*) DC control devices will not accept side mount auxiliaries.
(*) DC control exceptions that will accept one left side mounted auxiliary: LC1D115 & LC1D150.
N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
--1-----------1--------LAD8N11----------LA8DN11
--2-----------0--------LAD8N20----------LA8DN20
--0-----------2--------LAD8N02----------N/A
Footnotes:
{1.EN_US} EN50 012 Machine Tool Terminal Markings
{2.EN_US} (2) NO Sealed Dust Tight Contacts
{3.EN_US} Gold Flash Contacts
{4.EN_US} (1) NO & (1) NC Standard and (1) NO & (1) NC Make Before Break
{5.EN_US} (2) NO Dust Tight Contacts & (1) NO & (1) NC Standard Contacts
{6.EN_US} (2) NO Dust Tight Contacts & (2) NO Standard Contacts
Auxiliary contact modules for the LC1D and LC2D contactors
Product Line:
Contactor and Starters - IEC
Environment:
North American Products
Resolution:
Select based on application requirements. Please note that the TeSys and Pre-TeSys auxiliary blocks are backward/forward compatible.
Front Mounting; maximum of 1 block per contactor:
N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
--1-----------1---------LADN11-----------LA1DN11
--1-----------1---------LADN11G---------LA1DN11G (See Footnote 1)
--1-----------1---------LADN11P---------LA1DN11P (See Footnote 1)
--2-----------0---------LADN20-----------LA1DN20
--2-----------0---------LA1DX20---------LA1DX20 (See Footnote 2)
--2-----------0---------LA1DY20---------LA1DY20 (See Footnote 3)
--0-----------2---------LADN02-----------LA1DN02
--2-----------2---------LADN22-----------LA1DN22
--2-----------2---------LADN22G---------LA1DN22G (See Footnote 1)
--2-----------2---------LADN22P---------LA1DN22P (See Footnote 1)
--2-----------2---------LADC22------------LA1DC22 (See Footnote 4)
--3-----------1---------LADN31------------LA1DN31
--3-----------1---------LA1DZ31----------LA1DZ31 (See Footnote 5)
--1-----------3---------LADN13------------LA1DN13
--4-----------0---------LADN40------------LA1DN40
--4-----------0---------LA1DZ40-----------LA1DZ40 (See Footnote 6)
--0-----------4---------LADN04------------LA1DN04
Front Mounting; maximum of 1 block per contactor: For use with D2 Series 25 amp through 80 amp contactors and TeSys Series 40 amp through 80 amp only.
N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
--1-----------0--------LADN10----------LA1DN10
--0-----------1--------LADN01----------LA1DN01
Side Mounting; maximum of 1 block on each side for D2 Series and Tesys Series 40 through 80 amp contactors. Tesys 9 through 32, 115, and 150 amps contactors will accept 1 block and is limited to left side only. (*) DC control devices will not accept side mount auxiliaries.
(*) DC control exceptions that will accept one left side mounted auxiliary: LC1D115 & LC1D150.
N.O.-------N.C.-----TeSys P/N--------Pre-TeSys P/N
--1-----------1--------LAD8N11----------LA8DN11
--2-----------0--------LAD8N20----------LA8DN20
--0-----------2--------LAD8N02----------N/A
Footnotes:
{1.EN_US} EN50 012 Machine Tool Terminal Markings
{2.EN_US} (2) NO Sealed Dust Tight Contacts
{3.EN_US} Gold Flash Contacts
{4.EN_US} (1) NO & (1) NC Standard and (1) NO & (1) NC Make Before Break
{5.EN_US} (2) NO Dust Tight Contacts & (1) NO & (1) NC Standard Contacts
{6.EN_US} (2) NO Dust Tight Contacts & (2) NO Standard Contacts
Issue:
Need to know the size of the conduit entry in the 9001BR enclosures?
Product Line:
Push Buttons and Operators Interface
Environment:
Class 9001 Type BR Control stations
Resolution:
1/2-14 NPT Pipe tap in bottom only.
Need to know the size of the conduit entry in the 9001BR enclosures?
Product Line:
Push Buttons and Operators Interface
Environment:
Class 9001 Type BR Control stations
Resolution:
1/2-14 NPT Pipe tap in bottom only.
Issue:
Needing 2pole Dual function breaker for 240V loads.
Product Line:
Miniature Circuit Breakers
Resolution:
No, QO and HOM DF dual function breakers are not available in a 2 pole version. They are available in single pole only.
What is available are 2 pole versions of GFI ground fault breakers.
Needing 2pole Dual function breaker for 240V loads.
Product Line:
Miniature Circuit Breakers
Resolution:
No, QO and HOM DF dual function breakers are not available in a 2 pole version. They are available in single pole only.
What is available are 2 pole versions of GFI ground fault breakers.
Issue:
Product Design Features
Product Line:
Circuit Breaker Enclosures
Resolution:
NOTE: This information will generally apply to ALL the Molded Case Circuit Breaker Enclosures(The F-frame, B-Frame, H-frame, the J-frame, the L-frame, the M-frame and P-Frame). But for the video a J250S was used.
The wiring diagram on the circuit breaker enclosures will be located on, one of the inside sidewalls of the enclosure. All the necessary information for the enclosure will be on the wiring diagram and will contain the following;
1) Catalog and series number of the enclosure
2) What type of Circuit breakers that can be used
3) Any accessory that can be used in the enclosure, like the solid neutral and equipment ground kit
4) The UL listed catalog number Prefixes for the breakers that can be used in the enclosure
5) Maximum wire sizes for the enclosure(NOTE: Sometimes the breaker can accept larger wire, BUT the enclosure wire bending space will be limited to what the wiring diagram shows)
6) The Wiring schematics
7) The Short Circuit Current Rating information for each breaker at each voltage level
8) The Date code. The date code will be an ink stamp, generally located on the inside back wall of the enclosure. The Date Code will be a 5 or 6 digit code and will read as follows; first two digits = year, the 2nd two digits = week of the year, the 5th digit = the day of the week and the last digit(if used) = the shift. For example, 183241 is year - 2018, week of year -32, day of week - 4 and shift - 1. (Aug. 9th, 2018)
Product Design Features
Product Line:
Circuit Breaker Enclosures
Resolution:
NOTE: This information will generally apply to ALL the Molded Case Circuit Breaker Enclosures(The F-frame, B-Frame, H-frame, the J-frame, the L-frame, the M-frame and P-Frame). But for the video a J250S was used.
The wiring diagram on the circuit breaker enclosures will be located on, one of the inside sidewalls of the enclosure. All the necessary information for the enclosure will be on the wiring diagram and will contain the following;
1) Catalog and series number of the enclosure
2) What type of Circuit breakers that can be used
3) Any accessory that can be used in the enclosure, like the solid neutral and equipment ground kit
4) The UL listed catalog number Prefixes for the breakers that can be used in the enclosure
5) Maximum wire sizes for the enclosure(NOTE: Sometimes the breaker can accept larger wire, BUT the enclosure wire bending space will be limited to what the wiring diagram shows)
6) The Wiring schematics
7) The Short Circuit Current Rating information for each breaker at each voltage level
8) The Date code. The date code will be an ink stamp, generally located on the inside back wall of the enclosure. The Date Code will be a 5 or 6 digit code and will read as follows; first two digits = year, the 2nd two digits = week of the year, the 5th digit = the day of the week and the last digit(if used) = the shift. For example, 183241 is year - 2018, week of year -32, day of week - 4 and shift - 1. (Aug. 9th, 2018)
Issue:
Power wires installation for AC drives
Product Line:
Altivar drives
Environment:
All
Cause:
Installation
Resolution:
Good wiring practice requires the separation of control wiring from power wiring. Power wiring to the motor must have the maximum possible separation from all other power wiring, whether from the same drive controller or other drive controllers. Do not run power and control wiring, or multiple power wiring, in the same conduit. This separation reduces the possibility of coupling electrical transients from power circuits into control circuits or from motor power wiring into other power circuits.
Use of special shielded cables does not reduce or eliminate the need for cable separation.
Please refer to the installation documents for more information.
Power wires installation for AC drives
Product Line:
Altivar drives
Environment:
All
Cause:
Installation
Resolution:
Good wiring practice requires the separation of control wiring from power wiring. Power wiring to the motor must have the maximum possible separation from all other power wiring, whether from the same drive controller or other drive controllers. Do not run power and control wiring, or multiple power wiring, in the same conduit. This separation reduces the possibility of coupling electrical transients from power circuits into control circuits or from motor power wiring into other power circuits.
Use of special shielded cables does not reduce or eliminate the need for cable separation.
Please refer to the installation documents for more information.
Issue:
Drawings for common EX Transformers
Product Line:
LV Transformers
Environment:
Applies to Low Voltage Ventilated EX Transformers by SquareD/Schneider Electric
Cause:
Transformers for some applications require drawings
Resolution:
There is a Website set up for the purpose of obtaining Three Phase Ventilated EX Transformer drawings. Drawings for common three phase EX type Transformers may be obtained by using this link:
http://www.schneider-electric.us/en/product-range-download/63362-doe-2016-square-d-energy-efficient-ex-transformers/?filter=business-4-electrical-distribution&parent-category-id=53700
Drawings for common EX Transformers
Product Line:
LV Transformers
Environment:
Applies to Low Voltage Ventilated EX Transformers by SquareD/Schneider Electric
Cause:
Transformers for some applications require drawings
Resolution:
There is a Website set up for the purpose of obtaining Three Phase Ventilated EX Transformer drawings. Drawings for common three phase EX type Transformers may be obtained by using this link:
http://www.schneider-electric.us/en/product-range-download/63362-doe-2016-square-d-energy-efficient-ex-transformers/?filter=business-4-electrical-distribution&parent-category-id=53700
Issue:
What is the power in watts on the DL1BA and DL1BL bulbs used in the XVA indicating banks?
Product Line:
Harmony Tower Lights
Environment:
Harmony XB4/ZB4 Metal Push Buttons
Cause:
Product Features
Resolution:
AC or DC
2.5W 12V DL1BA012
4W 24V DL1BA024
6.5W 24V DL1BL024
4W 48V DL1BA048
7W 110V DL1BA110
7W 120V DL1BL120
5W 160V DL1BA160
6W 260V DL1BA260
What is the power in watts on the DL1BA and DL1BL bulbs used in the XVA indicating banks?
Product Line:
Harmony Tower Lights
Environment:
Harmony XB4/ZB4 Metal Push Buttons
Cause:
Product Features
Resolution:
AC or DC
2.5W 12V DL1BA012
4W 24V DL1BA024
6.5W 24V DL1BL024
4W 48V DL1BA048
7W 110V DL1BA110
7W 120V DL1BL120
5W 160V DL1BA160
6W 260V DL1BA260
Issue:
Identifying the coil terminals for an LC1D TeSys D-Line contactor.
Product Line:
D Line contactors.
Environment:
Products sold in the United States.
Cause:
Product features.
Resolution:
The coil terminals are labelled A1 and A2.
Identifying the coil terminals for an LC1D TeSys D-Line contactor.
Product Line:
D Line contactors.
Environment:
Products sold in the United States.
Cause:
Product features.
Resolution:
The coil terminals are labelled A1 and A2.
Issue:
Needs the line reactor part number for a 15HP 460VAC drive
Product Line:
All
Environment:
All
Cause:
Input or output line/load reactor part numbers.
Resolution:
RL02503 is open style.
RL02513 is enclosed NEMA type 1.
Both are 5% reactors rated for 15HP 480V 3 phase.
This reactor will fit the ATV31HD11N4, ATV61HD11N4 and ATV71HD11N4 or any 15HP 460VAC drive.
Issue:
What is the replacement lens cap for ZB2BW extended head push button?
Product Line:
Harmony Pushbuttons
Environment:
All Products
Cause:
Product selection
Resolution:
The ZB2 product line is discontinued. The replacement heads are no longer available
ZB2BW931 - White
ZB2BW933 - Green
ZB2BW934 - Red
ZB2BW935 - Ambler
ZB2BW936 - Blue
ZB2BW937 - Clear
What is the replacement lens cap for ZB2BW extended head push button?
Product Line:
Harmony Pushbuttons
Environment:
All Products
Cause:
Product selection
Resolution:
The ZB2 product line is discontinued. The replacement heads are no longer available
ZB2BW931 - White
ZB2BW933 - Green
ZB2BW934 - Red
ZB2BW935 - Ambler
ZB2BW936 - Blue
ZB2BW937 - Clear
Issue:
Product features
Product Line:
Load Center Ground Bars
Resolution:
The terminals provided on the PK3GTA through PK27GTA ground bars will accept the following:
NOTES:
1) The ground bars will accept either solid or stranded type wires.
2) As shown below the PK ground bars will accept Mutiple wires for certain sizes.
3) ONLY the PK27GTA comes standard with one lug that mounts to the TOP of the ground bar and will accept (1) #6 - 2/0 Cu/Al wire
Wire Sizes for ALL the PK3GTA through PK27GTA ground bars:
(1) #14 - #4 CU / AL
(2) #14 CU wires
(2) # 12 CU / AL wires
(2) #10 AL wires
Torque requirements:
Wire range Torque LB-IN
(1) #4 CU / AL 35
(1) #6 CU / AL 35
(1) #8 CU / AL 25
(1) #10 - 14 CU, #10 - 12 AL 20
(2) #14 CU 25
(2) #12 CU / AL 25
(2) #10 AL 25
SEE THE ATTACHMENT FOR THE DIMENSIONAL INFORMATION FOR THE GROUND BARS.
Product features
Product Line:
Load Center Ground Bars
Resolution:
The terminals provided on the PK3GTA through PK27GTA ground bars will accept the following:
NOTES:
1) The ground bars will accept either solid or stranded type wires.
2) As shown below the PK ground bars will accept Mutiple wires for certain sizes.
3) ONLY the PK27GTA comes standard with one lug that mounts to the TOP of the ground bar and will accept (1) #6 - 2/0 Cu/Al wire
Wire Sizes for ALL the PK3GTA through PK27GTA ground bars:
(1) #14 - #4 CU / AL
(2) #14 CU wires
(2) # 12 CU / AL wires
(2) #10 AL wires
Torque requirements:
Wire range Torque LB-IN
(1) #4 CU / AL 35
(1) #6 CU / AL 35
(1) #8 CU / AL 25
(1) #10 - 14 CU, #10 - 12 AL 20
(2) #14 CU 25
(2) #12 CU / AL 25
(2) #10 AL 25
SEE THE ATTACHMENT FOR THE DIMENSIONAL INFORMATION FOR THE GROUND BARS.
Issue:
Looking for part number for Break-glass Operator
Looking for part number for Break-glass Operator
Product Line:
Push Buttons and Operator Interface
Push Buttons and Operator Interface
Environment:
9001 Type K Push Buttons
9001 Type K Push Buttons
Cause:
Repair
Repair
Resolution:
The operator only is not available.
The operator only is not available.
Issue:
Looking for the watts loss on a ATS48 soft start
Product Line:
Altistart ATS48 soft starters
Environment:
All
Cause:
Needs to know the dissipated heat loss in watts the ATS48 soft starter will produce when running at full load.
Resolution:
See the table below and choose the ATS48's watt loss based on if a shorting contactor is being used or not.
Looking for the watts loss on a ATS48 soft start
Product Line:
Altistart ATS48 soft starters
Environment:
All
Cause:
Needs to know the dissipated heat loss in watts the ATS48 soft starter will produce when running at full load.
Resolution:
See the table below and choose the ATS48's watt loss based on if a shorting contactor is being used or not.
Issue:
Part number for ATV312 Din rail mounting kit
Product Line:
ATV312
Environment:
All
Cause:
Desire to utilize din mounting kit option
Resolution:
The part numbers need to order the mounting kit for this drive are VW3A9804 and VW3A9805.
VW3A9804 covers the following range of drives: ATV312....
018M2, H037M2, H055M2, H075M2, H018M3, H037M3, H055M3, H075M3
VW3A9805 covers the following range of drives: ATV312....
HU11M2, HU15M2, HU11M3, HU15M3, HU22M3, H037N4, H055N4, H075N4, HU11N4, HU15N4, H075S6, HU15S6
Note: The din rail mounting kits are only available for the above drives.
Note: Other drives not list above do not have a din rail kit.
Part number for ATV312 Din rail mounting kit
Product Line:
ATV312
Environment:
All
Cause:
Desire to utilize din mounting kit option
Resolution:
The part numbers need to order the mounting kit for this drive are VW3A9804 and VW3A9805.
VW3A9804 covers the following range of drives: ATV312....
018M2, H037M2, H055M2, H075M2, H018M3, H037M3, H055M3, H075M3
VW3A9805 covers the following range of drives: ATV312....
HU11M2, HU15M2, HU11M3, HU15M3, HU22M3, H037N4, H055N4, H075N4, HU11N4, HU15N4, H075S6, HU15S6
Note: The din rail mounting kits are only available for the above drives.
Note: Other drives not list above do not have a din rail kit.
The fault code 151 means that MsgOut is smaller than 12 Byte when 'Modbus Master Messaging' function is selected.
To prevent this fault do the following:
1. Increase the array size of variable defined for MsgOut parameter.
2. Use array of same size as defined in step#1 for the variable of parameter MsgIN.
Issue:
Powering the ATV312 by an external 24Vdc only
Product Line:
Altivar 312
Environment:
All
Cause:
Installation/programming
Resolution:
No, this drive must have line voltage applied. The voltage must be within -15% to +10% of the rated line voltage.
Powering the ATV312 by an external 24Vdc only
Product Line:
Altivar 312
Environment:
All
Cause:
Installation/programming
Resolution:
No, this drive must have line voltage applied. The voltage must be within -15% to +10% of the rated line voltage.
No, the breaker is Polarized and can only be Fed from Bottom
It will be the same for all iC0H DC single pole breakers:
C60H-DC Rating (In) Reference C curve 1P
1A A9N61501
2A A9N61502
4A A9N61504
6A A9N61506
10A A9N61508
16A A9N61511
20A A9N61512
25A A9N61513
32A A9N61515
40A A9N61517
50A A9N61518
63A A9N61519
This article contains a video
Summary
There are a few Citect drivers that will work with the S7 1500 PLC, including PSDIRECT and some of the S7 driver range. The recommended driver is the PSDIRECT driver.
Situation
- Citect SCADA/AVEVA Plant SCADA
- S7-1500 PLC
Actions
The driver we recommend using to communicate with the S7-1500 PLC is the PSDIRECT driver. PSDirect driver can be downloaded from the Citect website. This driver works in conjunction with a backend driver "Siemens Industrial Ethernet" which can be downloaded from the ProSCADA website mentioned below. There is more information about this in the following links.
Information and links to the drivers:
http://www.proscada.com/Citect.htm
Configuration information:
http://www.proscada.com/DOC/PSDIRECT_Driver_Specification_2.6.pdf
This driver is a paid driver, meaning you can test out the demo version but will need to purchase a license for the full version.
Issue:
Identifying differences between two part numbers
Product Line:
IEC contactors and starters
Environment:
Products sold and used in the United States
Cause:
Selecting between two similar part numbers
Resolution:
LA9D11569 is a set of power connections. LA9D115691 is the bottom connector only as shown on page 16-9 of Digest 173 for the LC1D115 and LC1D150 contactor.
Identifying differences between two part numbers
Product Line:
IEC contactors and starters
Environment:
Products sold and used in the United States
Cause:
Selecting between two similar part numbers
Resolution:
LA9D11569 is a set of power connections. LA9D115691 is the bottom connector only as shown on page 16-9 of Digest 173 for the LC1D115 and LC1D150 contactor.
The 3157/4PRM is a 54mm deep plastic wall box to suit ICONIC quad outlets.
The other flush mounting accessory option is a Clipsal 3155H4 or PDL155H4 which is a metal stud mount bracket.
See link for more details:https://www.clipsal.com/products/detail?CatNo=3155H4&backto=/search?q=3155H4&tab-document-1=0&itemno=3155H4
Clipsal Iconic - Moulded Plastic Wall Box to Suit Iconic Quad Socket with Sliding Recessed Nuts - Deep Type (54mm Depth)
See link :https://www.clipsal.com/products/detail?CatNo=3157/4PRM&backto=/search?q=3157/4PRM&tab-document-1=0&itemno=3157/4PRM
See link for more details:https://www.clipsal.com/products/detail?CatNo=3155H4&backto=/search?q=3155H4&tab-document-1=0&itemno=3155H4
The new generation programmable time switches (CCT15720, CCT15721, CCT15722, CTT15723, CCT15850, CCT15851,CCT15852, CCT15853, CCT16650 and CCT15652) integrate the O-crossing technique. This is an electronic procedure enabling the circuit to be opened at zero current, which enables the electromechanical contact to be operated off-load.
This is used to avoid the inrush currents of certain loads, particularly lighting.
This solution involves a low leakage current traveling through the electronics which generates residual voltage at the contact terminals, even when open. This can cause problems when very low loads (small relays, LEDs, etc.) are operated, as the receiver may be "held on" by this spurious voltage.
Note:
For this type of application (low load), a conventional electromechanical programmable time switch should be used.
This is used to avoid the inrush currents of certain loads, particularly lighting.
This solution involves a low leakage current traveling through the electronics which generates residual voltage at the contact terminals, even when open. This can cause problems when very low loads (small relays, LEDs, etc.) are operated, as the receiver may be "held on" by this spurious voltage.
Note:
For this type of application (low load), a conventional electromechanical programmable time switch should be used.
Issue:
Can the TeSys D line be used to control DC loads?
Product Line:
Tesys D contactors
Environment:
Products sold and used in the United States
Cause:
DC power circuit
Resolution:
Yes, 75 VDC (125 VDC for D115 & D150) per pole which means that through a four pole device breaking 300 VDC is possible by wiring all four power poles in series. However, be aware that the device current ratings will differ according to the number of poles in series and the type of application.
Devices are suitable but not UL Listed for DC applications.
More information on their DC ratings can be found in the current TeSys Motor Control and Protection Compentns catalog: https://www.schneider-electric.us/en/download/document/MKTED210011EN/
Can the TeSys D line be used to control DC loads?
Product Line:
Tesys D contactors
Environment:
Products sold and used in the United States
Cause:
DC power circuit
Resolution:
Yes, 75 VDC (125 VDC for D115 & D150) per pole which means that through a four pole device breaking 300 VDC is possible by wiring all four power poles in series. However, be aware that the device current ratings will differ according to the number of poles in series and the type of application.
Devices are suitable but not UL Listed for DC applications.
More information on their DC ratings can be found in the current TeSys Motor Control and Protection Compentns catalog: https://www.schneider-electric.us/en/download/document/MKTED210011EN/
The Altivar 71 Drive Braking IGBT operates when the value of DC Bus Voltage is higher than the DC Bus Threshold Voltage OBR. When the value of the DC Bus Voltage is lower than the threshold voltage (Unom_max + 10%), the Braking IGBT/Transistor is switched off.
The Voltage Threshold Values for a Drive working on 220VAC or 415VAC, 3Phase is provided in the attachment.
Note:
OBR is the threshold point where the Braking Transistor switches ON and Unom_max + 10% is the threshold point where the Braking Transistor switches OFF.
To reset the ITM, follow these instructions:
- Replace the security code 111 with 753
- Switch off the power supply
- Restore the power supply to the product
- After following these instructions, the ITM can then be reprogrammed (because its memory is empty)
Issue:
LC1D115 and D150 mounting
Product Line:
Tesys D contactors
Environment:
Products sold and used in the United States
Cause:
Din rail mounting desired for large D line contactor
Resolution:
Yes, they use 2-35mm din rails
LC1D115 and D150 mounting
Product Line:
Tesys D contactors
Environment:
Products sold and used in the United States
Cause:
Din rail mounting desired for large D line contactor
Resolution:
Yes, they use 2-35mm din rails
Issue:
Which serial communication cable can I use with a Smart UPS RT "SURTD" model UPS?
Product Line:
Environment:
Cause:
Users may need to order a spare communication cable or verify the correct part number.
Resolution:
The SURTD online UPS models use an RJ-45 to DB-9 Serial Cable. The part number is 940-1525A and as a spare part through most resellers or distribution channels using the part number 0J-940-1525A.
This communication cable is shipped with a new UPS.
Which serial communication cable can I use with a Smart UPS RT "SURTD" model UPS?
Product Line:
- Smart UPS Online models with the following model prefix:
- SURTD
Environment:
- All serial numbers
- All firmware versions
Cause:
Users may need to order a spare communication cable or verify the correct part number.
Resolution:
The SURTD online UPS models use an RJ-45 to DB-9 Serial Cable. The part number is 940-1525A and as a spare part through most resellers or distribution channels using the part number 0J-940-1525A.
This communication cable is shipped with a new UPS.
Issue:
The following video details the process for the initial setup of the Back-UPS PRO, BX/BR "G " including battery connection, AC wall outlet and device connection, and display configuration.
Product Line:
Back-UPS PRO, BX/BR "G ".
Environment:
All models
Cause / Resolution:
The following video details the process for the initial setup of the Back-UPS PRO, BX/BR "G " including battery connection, AC wall outlet and device connection, and display configuration.
Product Line:
Back-UPS PRO, BX/BR "G ".
Environment:
All models
Cause / Resolution:
Issue:
LC1D115-150 Coil voltages options
Product Line:
Contactors and Starters-IEC
Environment:
Tesys D Contactors
Resolution:
The following list the more common voltage suffix codes for these product lines. For a more comprehensive list and to determine compatibility with a given product, refer to the catalog below.
Note 1: LC1D150 contactors are only available with *7 coil codes.
Note 2: Coil Code ending number represents frequency rating as follows:
5 = 50 Hertz
6 = 60 Hertz
7 = 50/60 Hertz
AC Volts ___Code DC Volts ___Code
24 ___ B5 or B6 or B7 12 ___ Not Avail.
42 ___ D5 or D7 24 ___ BD
48 ___ E5 or E6 or E7 36 ___ CD
110 ___ F5 or F6 or F7 48 ___ ED
115 ___ FE5 or FE7 60 ___ ND
120 ___ G6 or G7 72 ___ SD
127 ___ FC5 or FC7 110 ___ FD
208 ___ L6 or LE7 125 ___ GD
220 ___ M5 or M6 or M7 220 ___ MD
230 ___ P5 or P7 250 ___ UD
240 ___ U5 or U6 or U7 440 ___ RD
277 ___ W6 or UE7
380 ___ Q5 or Q6 or Q7
400 ___ V5 or V7
415 ___ N5 or N7
440 ___ R5 or R6 or R7
480 ___ T6 or T7
500 ___ S5 or S7
LC1D115-150 Coil voltages options
Product Line:
Contactors and Starters-IEC
Environment:
Tesys D Contactors
Resolution:
The following list the more common voltage suffix codes for these product lines. For a more comprehensive list and to determine compatibility with a given product, refer to the catalog below.
Note 1: LC1D150 contactors are only available with *7 coil codes.
Note 2: Coil Code ending number represents frequency rating as follows:
5 = 50 Hertz
6 = 60 Hertz
7 = 50/60 Hertz
AC Volts ___Code DC Volts ___Code
24 ___ B5 or B6 or B7 12 ___ Not Avail.
42 ___ D5 or D7 24 ___ BD
48 ___ E5 or E6 or E7 36 ___ CD
110 ___ F5 or F6 or F7 48 ___ ED
115 ___ FE5 or FE7 60 ___ ND
120 ___ G6 or G7 72 ___ SD
127 ___ FC5 or FC7 110 ___ FD
208 ___ L6 or LE7 125 ___ GD
220 ___ M5 or M6 or M7 220 ___ MD
230 ___ P5 or P7 250 ___ UD
240 ___ U5 or U6 or U7 440 ___ RD
277 ___ W6 or UE7
380 ___ Q5 or Q6 or Q7
400 ___ V5 or V7
415 ___ N5 or N7
440 ___ R5 or R6 or R7
480 ___ T6 or T7
500 ___ S5 or S7
Issue:
Wondering if the ATV61 or ATV71 drives are available in type 4 or 4X enclosures
Product Line:
Altivar ATV61 and ATV71 open type drives
Environment:
All
Cause:
Needs to get the ATV61 and ATV71 drive in a NEMA 4 or 4X stand alone enclosure.
Resolution:
There is not a standard offering for type 4 or 4X enclosures for our drives.
It may be possible to install the drive in a properly selected enclosure by a local panel builder or contractor.
Or, contact a local SquareD field office for assistance. They may be able to offer assistance with other options.
Wondering if the ATV61 or ATV71 drives are available in type 4 or 4X enclosures
Product Line:
Altivar ATV61 and ATV71 open type drives
Environment:
All
Cause:
Needs to get the ATV61 and ATV71 drive in a NEMA 4 or 4X stand alone enclosure.
Resolution:
There is not a standard offering for type 4 or 4X enclosures for our drives.
It may be possible to install the drive in a properly selected enclosure by a local panel builder or contractor.
Or, contact a local SquareD field office for assistance. They may be able to offer assistance with other options.
ISSUE
In which contactors can the LA1DN and LADN auxiliary contacts be mounted?
PRODUCT LINE
Auxiliary contacts for the Tesys D line
ENVIRONMENT
Tesys D-Line and Tesys F
RESOLUTION
These contacts will only fit on the following contactors:
Front mount only for LC1D40 through LC1D115 devices and LC1D40A - LC1D65A.
Left side mount only to LC1F contactors
In which contactors can the LA1DN and LADN auxiliary contacts be mounted?
PRODUCT LINE
Auxiliary contacts for the Tesys D line
ENVIRONMENT
Tesys D-Line and Tesys F
RESOLUTION
These contacts will only fit on the following contactors:
Front mount only for LC1D40 through LC1D115 devices and LC1D40A - LC1D65A.
Left side mount only to LC1F contactors
Issue:
BACnet device name change
Product Line:
ATV61 drives with VW3A3315 or VW3A3319 BACnet option card.
Environment:
ATV61 drives with BacNet option card
Cause:
The object name that holds the device name can not be modified and always is ATV61.
Resolution:
The ATV61 Bacnet cards (VW3A3315 or VW3A3319) produced after November 2014 have Firmware version V1.1ie09.
This version automatically assigns the device name to ATV61, followed by the 3 digit address set by the DIP switches on the option card (called the MAC address).
As long as there are no duplicate addresses, there will not be any duplicate names.
Prior to this firmware release, it was not possible to change the device name for the ATV61.
For older versions, the workaround is to assign a device name directly to the drive via the 7 [Display Config] -- 7.1 [User parameters] -- [device Name].
This name will appear in the BACnet controller under Deivce Object Type -- "descripition". Please check the attached example screen capture.
BACnet device name change
Product Line:
ATV61 drives with VW3A3315 or VW3A3319 BACnet option card.
Environment:
ATV61 drives with BacNet option card
Cause:
The object name that holds the device name can not be modified and always is ATV61.
Resolution:
The ATV61 Bacnet cards (VW3A3315 or VW3A3319) produced after November 2014 have Firmware version V1.1ie09.
This version automatically assigns the device name to ATV61, followed by the 3 digit address set by the DIP switches on the option card (called the MAC address).
As long as there are no duplicate addresses, there will not be any duplicate names.
Prior to this firmware release, it was not possible to change the device name for the ATV61.
For older versions, the workaround is to assign a device name directly to the drive via the 7 [Display Config] -- 7.1 [User parameters] -- [device Name].
This name will appear in the BACnet controller under Deivce Object Type -- "descripition". Please check the attached example screen capture.
Product Line:
EasyPact CVS circuit breakers
Resolution:
There are no plans for a general release of the EasyPact CVS circuit breaker line in North America.
EasyPact CVS circuit breakers
Resolution:
There are no plans for a general release of the EasyPact CVS circuit breaker line in North America.
Issue:
Replacement standard key for the 9001 oeprators.
Product Line:
Push Buttons and Operator Interface
Environment:
Harmony Pushbuttons
Resolution:
The standard key is the E10 key which is catalog number 2941101100.
Replacement standard key for the 9001 oeprators.
Product Line:
Push Buttons and Operator Interface
Environment:
Harmony Pushbuttons
Resolution:
The standard key is the E10 key which is catalog number 2941101100.
Issue:
Time current curves for H and J MCP
Product Line:
Circuit Breakers
Resolution:
Attached are the trip curves for the Powerpact H and J motor circuit protectors (from document 0611CT1001).
Time current curves for H and J MCP
Product Line:
Circuit Breakers
Resolution:
Attached are the trip curves for the Powerpact H and J motor circuit protectors (from document 0611CT1001).
- When using Manual Settings, use trip curve 045-1.
- When using Auto Settings, use trip curve 045-2.
Issue:
AC coil replacement for CAD32 and CAD50
Product Line:
Relays
Environment:
Tesys CAD Control Relays
Cause:
Product selection
Resolution:
Volt = coil part number
12 = LXD1J7
21 = LXD1Z7
24 = LXD1B7
32 = LXD1C7
36 = LXD1CC7
42 = LXD1D7
48 = LXD1E7
60 = LXD1EE7
100 = LXD1K7
110 = LXD1F7
115 = LXD1FE7
120 = LXD1G7
127 = LXD1FC7
200 = LXD1L7
208 = LXD1LL7
220/230 = LXD1M7
230 595 21 LXD1P7
230/240 = LXD1U7
277 781 30 LXD1W7
380/400 = LXD1Q7
400 = LXD1V7
415 = LXD1N7
440 = LXD1R7
480 = LXD1T7
600 = LXD1X7
690 = LXD1Y7
AC coil replacement for CAD32 and CAD50
Product Line:
Relays
Environment:
Tesys CAD Control Relays
Cause:
Product selection
Resolution:
Volt = coil part number
12 = LXD1J7
21 = LXD1Z7
24 = LXD1B7
32 = LXD1C7
36 = LXD1CC7
42 = LXD1D7
48 = LXD1E7
60 = LXD1EE7
100 = LXD1K7
110 = LXD1F7
115 = LXD1FE7
120 = LXD1G7
127 = LXD1FC7
200 = LXD1L7
208 = LXD1LL7
220/230 = LXD1M7
230 595 21 LXD1P7
230/240 = LXD1U7
277 781 30 LXD1W7
380/400 = LXD1Q7
400 = LXD1V7
415 = LXD1N7
440 = LXD1R7
480 = LXD1T7
600 = LXD1X7
690 = LXD1Y7
Issue:
What is the product number for a complete through-the-door disconnect device for a GV2P
Product Line:
IEC Contactors and Starters
Environment:
GV2P Manual Starters and Protectors
Resolution:
There are three devices which include mechanism, shaft and handle:
GV2APN01 has a NEMA 1, 12 rating and is black
GV2APN02 has a NEMA 1, 12 rating and is red/yellow
GV2APN04 has a NEMA 3R, 4, 4X rating and is red/yellow
Product Line:
Arc Fault Circuit Breakers
Resolution:
No. So-called AFCI testers are on the market, but they are not UL listed for testing the function of a CAFI/AFI circuit breaker. UL 1436 refers to them as "indicators" rather than testers, and Square D does not endorse them or recommend their use. They are subject to error in the form of giving a false negative result.
The UL approved method of testing an AFCI circuit breaker is to press the push-to-test button when installed in an energized load center or panel. This test injects a signal into the AFCI sensor that looks like an arc to the AFCI. A properly functioning AFCI will trip when the test button is pushed as long as the panel is energized and the neutral pigtail/plug on neutral connection is made to the neutral bar.
Paragraph 31.8.1 of the UL 1436 standard requires the AFCI indicator markings or instructions to effectively state that the test button on the AFCI circuit breaker demonstrates proper operation.
Arc Fault Circuit Breakers
Resolution:
No. So-called AFCI testers are on the market, but they are not UL listed for testing the function of a CAFI/AFI circuit breaker. UL 1436 refers to them as "indicators" rather than testers, and Square D does not endorse them or recommend their use. They are subject to error in the form of giving a false negative result.
The UL approved method of testing an AFCI circuit breaker is to press the push-to-test button when installed in an energized load center or panel. This test injects a signal into the AFCI sensor that looks like an arc to the AFCI. A properly functioning AFCI will trip when the test button is pushed as long as the panel is energized and the neutral pigtail/plug on neutral connection is made to the neutral bar.
Paragraph 31.8.1 of the UL 1436 standard requires the AFCI indicator markings or instructions to effectively state that the test button on the AFCI circuit breaker demonstrates proper operation.
Issue:
InF fault on the Altivar 31 and ATV312 drives.
Product Line:
Altivar 31 and ATV312 drives
Environment:
All
Cause:
Internal fault
Resolution:
InF indicates an internal fault.
It can occur if there are loose connections inside the drive or if the drive is subjected to electromagnetic interference. Check the line voltage to the drive.
Also, check the voltages on the control terminals, +10 to COM and 24V to COM. It has been observed that improper wiring of the inputs or external potentiometer can overload the internal power supplies of the drive. This may result in InF fault.
Incorrect connections on the RJ45 ModBus/CANopen port can also cause this. Verify wiring, particularly to pin 7 (10VDC supply for external keypad).
InF fault on the Altivar 31 and ATV312 drives.
Product Line:
Altivar 31 and ATV312 drives
Environment:
All
Cause:
Internal fault
Resolution:
InF indicates an internal fault.
It can occur if there are loose connections inside the drive or if the drive is subjected to electromagnetic interference. Check the line voltage to the drive.
Also, check the voltages on the control terminals, +10 to COM and 24V to COM. It has been observed that improper wiring of the inputs or external potentiometer can overload the internal power supplies of the drive. This may result in InF fault.
Incorrect connections on the RJ45 ModBus/CANopen port can also cause this. Verify wiring, particularly to pin 7 (10VDC supply for external keypad).
Issue:
Where can I find the part numbers for the plastic part kits for the ATV61 and ATV71 drives?
Product Line:
Altivar ATV61 and ATV71
Environment:
All
Cause:
Looking for a plastic parts kit for the ATV61HU40M3 drive.
Resolution:
See the tables below or instruction bulletin 30072-453-27
Where can I find the part numbers for the plastic part kits for the ATV61 and ATV71 drives?
Product Line:
Altivar ATV61 and ATV71
Environment:
All
Cause:
Looking for a plastic parts kit for the ATV61HU40M3 drive.
Resolution:
See the tables below or instruction bulletin 30072-453-27
1) Enable Grid support in XW basic setup menu
2) Set Grid Support Voltage to 64V (32V for XW4024) and enable SELL in XW Advanced - Grid Support menu (only if firmware on the XW inverter/charger is 1.07)
3) Verify XW CHARGE CYCLE is '2Stg/NoFloat' in XW Advanced - Charger Settings - Charge Cycle (factory default setting)
4) On MPPT set CHARGE CYCLE to '3 stage' in MPPT Advanced - Charger Settings - Charge Cycle
5) It is also recommended that the system has a minimum battery capacity of 200Ah. An additional 100Ah for every 1kW of solar power is preferable.
3) Verify XW CHARGE CYCLE is '2Stg/NoFloat' in XW Advanced - Charger Settings - Charge Cycle (factory default setting)
4) On MPPT set CHARGE CYCLE to '3 stage' in MPPT Advanced - Charger Settings - Charge Cycle
5) It is also recommended that the system has a minimum battery capacity of 200Ah. An additional 100Ah for every 1kW of solar power is preferable.
Issue:
What is the replacement handle for 9001BR control station?
Product Line:
Push Buttons and Operator Interface
Environment:
Harmony Control Stations
Resolution:
Operating lever assembly part number is 3110111450. Includes the lever, shaft and pin.
What is the replacement handle for 9001BR control station?
Product Line:
Push Buttons and Operator Interface
Environment:
Harmony Control Stations
Resolution:
Operating lever assembly part number is 3110111450. Includes the lever, shaft and pin.