Standard Series, Flush Switch, 2 Gang, 250VAC, 10A, Architrave White Electric

Please see attached document for the characteristics of the new RCBos and below table shows the replacement part#s

RCBO
Material	Alternative Material	Description	Comment
QOE110BO3	QO110B10RCBO30F	QOE RCBO 1P+N 10A B 30mA 10kA	Direct Replacement
QOE116BO3	QO116B10RCBO30F	QOE RCBO 1P+N 16A B 30mA 10kA	Direct Replacement
QOE120BO3	QO120B10RCBO30F	QOE RCBO 1P+N 20A B 30mA 10kA	Direct Replacement
QOE132BO3	QO132B10RCBO30F	QOE RCBO 1P+N 32A B 30mA 10kA	Direct Replacement
QOE140BO3	QO140B10RCBO30F	QOE RCBO 1P+N 40A B 30mA 10kA	Direct Replacement

 

Issue:
Part number for the replacement of the ATS01N High HP Soft Starters.

Product line:
ATS01, Altistart 01, High HP

Environment:
All models

Cause:
The launch of the ATS22 in 2011 caused the High HP units to become redundant.

Resolution:

The ATS01 High HP units were replaced with the ATS22 units.  These are functional replacements only.  The ATS01 had no overload protection, an internal power supply and simple dial adjustments.  The ATS22 will require external 120V or 230V power.  There are no dials to adjust, but the unit will need to be programmed.  See the ATS22 User Manual, document BBV51330 to review the wiring, dimensions and programming.  See the attached file.

ATS01N230LY - 32A rated.  Replaced by ATS22D32S6U
ATS01N244LY - 44A rated.  Replaced by ATS22D47S6U
ATS01N272LY - 72A rated.  Replaced by ATS22D75S6U
ATS01N285LY - 85A rated.  Replaced by ATS22D88S6U

 

Issue:
Contacts need to be replaced in a CAD32** relay.

Product Line:
TeSys D IEC style relays

Environment:
CAD relays

Resolution:
The TeSys D IEC style relays do not offer replacement contacts.

Issue:
Operating temperature range for the Altistart 22

Product Line:
ATS22, Altistart 22

Environment:
All models, all serial numbers.

Cause:
high or low ambient temperatures.

Resolution:
The standard current ratings for the ATS22 is based on an ambient temperature of 40C (104F).  

The minimum operating temperature is -10C (14F).  The maximum operating temperature is 60C (140F).
When operating above 40C (104F), the softstart needs to be derated by 2.2% for every degree Celsius above 40C (104F).

For example:  ATS22D32S6U is 32A rated.  For an ambient temperature of 50C (122F), derating is 22% (2.2 x 10).  The 32A softstart rating becomes 24.96A (32A x 0.78 = 24.96). 

No, the breaker is Polarized and can only be Fed from Bottom

It will be the same for all iC0H DC single pole breakers:
C60H-DC Rating (In) Reference C curve 1P
1A A9N61501
2A A9N61502
4A A9N61504
6A A9N61506
10A A9N61508  
16A A9N61511
20A A9N61512
25A A9N61513
32A A9N61515
40A A9N61517
50A A9N61518
63A A9N61519

 

Material	Description	Comment	Direct Replacement
QO106EC10	MINIATURE CIRCUIT BREAKER 240V 6A	Discontinued	no replacement
QO110EC10	QOvs 1P 10A 10kA Type C	Direct Replacement	QO110VSC10
QO116EC10	QOvs 1P 16A 10kA Type C	Direct Replacement	QO116VSC10
QO120EC10	QOvs 1P 20A 10kA Type C	Direct Replacement	QO120VSC10
QO125EC10	QOvs 1P 25A 10kA Type C	Direct Replacement	QO125VSC10
QO132EC10	QOvs 1P 32A 10kA Type C	Direct Replacement	QO132VSC10
QO140EC10	QOvs 1P 40A 10kA Type C	Direct Replacement	QO140VSC10
QO150EC10	QOvs 1P 50A 10kA Type C	Direct Replacement	QO150VSC10
QO163EC10	QOvs 1P 63A 10kA Type C	Direct Replacement	QO163VSC10
QOH180XAUS	MCB QOH 1P 80A 6KA	Discontinued	no replacement
QOH1100XAUS	MCB QOH 1P 100A 6KA	Discontinued	no replacement
QO310EC10	QOvs 3P 10A 10kA Type C	Direct Replacement	QO310VSC10
QO316EC10	QOvs 3P 16A 10kA Type C	Direct Replacement	QO316VSC10
QO320EC10	QOvs 3P 20A 10kA Type C	Direct Replacement	QO320VSC10
QO325EC10	QOvs 3P 25A 10kA Type C	Direct Replacement	QO325VSC10
QO332EC10	QOvs 3P 32A 10kA Type C	Direct Replacement	QO332VSC10
QO340EC10	QOvs 3P 40A 10kA Type C	Direct Replacement	QO340VSC10
QO350EC10	QOvs 3P 50A 10kA Type C	Direct Replacement	QO350VSC10
QO363EC10	QOvs 3P 63A 10kA Type C	Direct Replacement	QO363VSC10
QOH380XAUS	MCB QOH 3P 80A 6KA	Discontinued	no replacement
RCBO
QOE110BO3	QOE RCBO 1P+N 10A B 30mA 10kA	Direct Replacement	QO110B10RCBO30F
QOE116BO3	QOE RCBO 1P+N 16A B 30mA 10kA	Direct Replacement	QO116B10RCBO30F
QOE120BO3	QOE RCBO 1P+N 20A B 30mA 10kA	Direct Replacement	QO120B10RCBO30F
QOE132BO3	QOE RCBO 1P+N 32A B 30mA 10kA	Direct Replacement	QO132B10RCBO30F
QOE140BO3	QOE RCBO 1P+N 40A B 30mA 10kA	Direct Replacement	QO140B10RCBO30F

We do not offer a single 3 Pole 32 Amps 30mA RCBO. 

You can use 3 Pole 32 Amps iC60 MCB and connect it with the 3 Pole Add-on Vigi Module "A9V02763" (comes with the neutral tail to be connected with the distributed neutral) - this combination is 6 Poles wide 

If balanced three phase system with out neutral you should use Add on Vigi "A9V51363" - this combination is 6½ Pole wide

There are two types of I range switch (iSW Switches) they have different properties and temperature ranges.
The difference is the ISO Standard that the product is manufactured to comply with:

• IEC/EN 60669
• IEC/EN 60947-3

For 20-32A they comply with IEC/EN 60669
For 40-125A they comply with IEC/EN 60947-3

The operating temperature of I range switches is:-

• For IEC/EN 60669 devices between - 20°C...+50°C without derating.
• For IEC/EN 60947-3 devices -25...+60 °C without derating.

Their storage temperature must be:-

• For IEC/EN 60669 devices between - 40...+100°C
• For IEC/EN 60947-3 devices between -40...+85 °C

We do not have any Type B RCBOs available, but this protection can be achieved using a RCCB and MCB.

Single phase = A9Z51240 + A9F54232

3 phase = A9Z51440 + A9F54432
 

NetShelter Replacement Keys for SX, SV, AV, VX, WX and AR8132A Combination Lock Handles

This document explains which keys are used for various NetShelter cabinets and how to obtain them.

NetShelter SX, SV, AV & VX: 
Please use Part W870-8135 as the replacement key for NetShelter SX, AV and VX front & rear door handles and side panels. This is a single key, not a pair. It’s a sellable part. It can also be RMA’d for in-warrantee replacement. We allow customers one extra key per cabinet as in-warrantee replacement during the first year of ownership. If you need an in-warrantee replacement please call APC customer service and have the cabinet's model number and serial number available.

NetShelter WX:
AR100 and AR100 HD please use Part 840-0103 as the replacement key & door handle kit. 
AR106, AR109 and AR112 please use W870-8135.

NetShelter CX: 
Please use Part 0H-0292-SE as the replacement keys for all NetShelter CX door locks. This is a set of two (2) keys.

AR8132A Combination Lock Handles:
We do not currently stock a replacement key for the AR8132A combination lock handle. If you need to order a replacement key it must be ordered direct from the manufacturer, EMKA. or one of their distributors. The EMKA part number is 1108-U36-222. See below for EMKA contact information.

EcoAisle: 
Key for drop out panels: W870-8135. 
Key for the sliding door: 0J-870-26645. 

EMKA contact information:
United States Headquarters: EMKA Inc.1961 Fulling Mill Road Middletown, PA 17057 Phone: 717-986-1111
European Headquarters: EMKA Beschlagteile GmbH & Co. KGLangenberger Str. 32D-42551 Velbert (Germany)Phone: +49 (0)2051 273-0
For specific regional contacts, please reference EMKA’s website. www.emka.com

1) Inside EV Link a mother board with a 24V power supply commanding a contact is installed. 
2) Less than 100W of consumption when the CT is closed. We are just a gate between the grid and the car.

So the maximum consumption is 100w (dedicated to 24v power supply, motherboard, contactor and led). Efficiency will be, 
If the load is a 3,7kW (16A 1P) efficiency = 97%
If the load is a 22kW (32A 3P) efficiency = 99,5%

But, also consider the Harmonics, Power factor produced by the Car itself which will affect efficiency. 
 

The replacement model for a NS100N 3 Pole is the NSX100F 3P range.

NSX100F: (36kA at 415V)
Complete/3 Pole Front Connected

Description	Type	Trip Unit	Rating	Part Number
NSX100F (36kA) Distribution Protection	Standard thermal-magnetic trip unit TM-D	TM16D	11-16A	LV429637
		TM25D	17-25A	LV429636
		TM32D	22-32A	LV429635
		TM40D	28-40A	LV429634
		TM50D	35-50A	LV429633
		TM63D	44-63A	LV429632
		TM80D	56-80A	LV429631
		TM100D	70-100A	LV429630
	Electronic Trip unit Micrologic 2.2 (LSol)	40A	18-40A	LV429772
		100A	40-100	LV429770
	Electronic Trip unit Micrologic 5.2A (LSI) (ammeter)	40A	18-40A	LV429882
		100A	40-100	LV429880
NSX100F (36kA) Motor Protection	Nagnetic only trip Unit MA	MA2.5	2.5A, 0.75kW	LV429745
		MA6.3	6.3A, 2.2kW	LV429744
		MA12.5	12.5A, 5.5kW	LV429743
		MA25	25A, 11kW	LV429742
		MA50	50A, 22kW	LV429741
		MA100	100A, 45kW	LV429740
	Electronic Trip unit Micrologic 2.2 (LSol)	25A	12-25A, 11kW	LV429828
		50A	25-50A, 22kW	LV429827
		100A	50- 100A, 45kW	LV429825

There is also a 4P model as well.

Please see link to Product guide - http://www2.schneider-electric.com/resources/sites/SCHNEIDER_ELECTRIC/content/live/FAQS/297000/FA297893/pl_PL/CROSSFER%20NS%20TO%20NSX.pdf