Standard Series, Automatic Single Socket Outlet Mechanism, 250VAC, 10A, Panel Mount White Electric
Item Number: 10MP-WE
Datasheet
Close
Specifications
Design
Range of product
Standard Series
Product or component type
socket-outlet
Product brand
Clipsal
Sustainable offer status
Green Premium product
Physical
Quantity per set
set of 1
Marking
without marking
Local signalling
without light indicator
Device mounting
flush
Fixing mode
by screws
[in] rated current
10 A
[ue] rated operational voltage
250 V AC
Depth
33 mm
Length
43 mm
Width
42 mm
Fixing center
84 mm
Number of poles
1
Standards
AS/NZS 3100|AS/NZS 3112|AS/NZS 3133:approval number S/1
Reach regulation
Reference contains Substances of Very High Concern above the threshold
Eu rohs directive
Compliant with Exemptions
Rohs exemption information
Yes
China rohs regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental disclosure
ENVPEP120506EN
Circularity profile
N/A
Others
Package 1 bare product quantity
1
Package 2 bare product quantity
5
Cover type
complete housing
Socket additional information
with hinged lid
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
3.4 cm
Package 1 width
4.3 cm
Package 1 length
4.3 cm
Package 1 weight
47.1 g
Unit type of package 2
BB1
Number of units in package 2
5
Package 2 height
6.8 cm
Package 2 width
8.8 cm
Package 2 length
11.2 cm
Package 2 weight
276 g
Take-back
No
Product contributes to saved and avoided emissions
No
Removable battery
N/A
Documents & downloads
hide showFilter items
-
All
-
Product Brochures
-
Technical Data Catalogues
-
Environmental Disclosure
-
Installation Instruction
-
Specification Guide
-
Declaration of Conformity
-
Certificates (MSDS)
Frequently Asked Questions
hide show
IEC 60755 describes general requirements for residual current operated protective devices.
❶ Vigi modules (Vigi NG125, see example in the figure)
The add-on Vigi module is the most flexible residual current device (it is installed in combination with a circuit breaker).
Vigi are covered by the IEC 61009 and IEC 62423 series of standards.
❷ Residual Current operated Circuit Breakers without integral overcurrent protection (RCCB) (Acti9 iID, see example in the figure)
The Acti 9 iID RCCB is the main residual current device in the facility and is used as the main incomer. RCCB are covered by the IEC 61008 and IEC 62423 series of standards.
❸ Residual Current operated circuit Breakers with integral Overcurrent protection (RCBO) (Acti 9 iCV40N, see example in the figure)
RCBO = combination of circuit breaker and residual current device function in the same product. This can be obtained by combining the circuit breaker with its Add-on Vigi Module.
RCBO are covered by the IEC 61009 and IEC 62423 series of standards.
❹ Socket RCD (SRCD) (see example in the figure) SRCD are covered by the IEC 62640 series of standards.
❺ Industrial type circuit breakers incorporating the RCD function must comply with Annex B of IEC 60947-2.
Residual current devices with a separate toroid are standardized in Annex M of IEC 60947-2.
Reference document - CA908066E
❶ Vigi modules (Vigi NG125, see example in the figure)
The add-on Vigi module is the most flexible residual current device (it is installed in combination with a circuit breaker).
Vigi are covered by the IEC 61009 and IEC 62423 series of standards.
❷ Residual Current operated Circuit Breakers without integral overcurrent protection (RCCB) (Acti9 iID, see example in the figure)
The Acti 9 iID RCCB is the main residual current device in the facility and is used as the main incomer. RCCB are covered by the IEC 61008 and IEC 62423 series of standards.
❸ Residual Current operated circuit Breakers with integral Overcurrent protection (RCBO) (Acti 9 iCV40N, see example in the figure)
RCBO = combination of circuit breaker and residual current device function in the same product. This can be obtained by combining the circuit breaker with its Add-on Vigi Module.
RCBO are covered by the IEC 61009 and IEC 62423 series of standards.
❹ Socket RCD (SRCD) (see example in the figure) SRCD are covered by the IEC 62640 series of standards.
❺ Industrial type circuit breakers incorporating the RCD function must comply with Annex B of IEC 60947-2.
Residual current devices with a separate toroid are standardized in Annex M of IEC 60947-2.
Reference document - CA908066E
Yes, a rectangular sensor can be installed upstream or downstream of a circuit breaker.
Firstly Choose from the two types of relays, (DIN rail mount or Front-panel mount) Using the tables below.
Then make a selection dependent on the voltage required along with the settings desired.
Vigirex Earth Leakage Protection Relay (DIN rail mount)
Vigirex Earth Leakage Protection Relay (Front-Panel mount)
Then choose a Toroidal to suit:
Vigirex Sensors (Toroidal and rectangular)
For further information please visit https://www.se.com/au/en/product-range/1014-vigirex/?parent-subcategory-id=4250
Then make a selection dependent on the voltage required along with the settings desired.
Vigirex Earth Leakage Protection Relay (DIN rail mount)
| TYPE | POWER SUPPLY | SETTINGS | REFERENCE |
|---|---|---|---|
| RH21M | 12 to 24V AC- 12 to 48V DC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56160 |
| 48V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56161 | |
| 110 to 130V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56162 | |
| 220 to 240V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56163 | |
| 380 to 415V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56164 | |
| 440 to 525VAC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56165 | |
| RH99M | 12 to 24V AC- 12 to 48V DC | 30mA to 30A- Inst to 4.5s | 56170 |
| 48V AC | 30mA to 30A- Inst to 4.5s | 56171 | |
| 110 to 130V AC | 30mA to 30A- Inst to 4.5s | 56172 | |
| 220 to 240V AC | 30mA to 30A- Inst to 4.5s | 56173 | |
| 380 to 415V AC | 30mA to 30A- Inst to 4.5s | 56174 | |
| 440 to 525V ac | 30mA to 30A- Inst to 4.5s | 56175 |
Vigirex Earth Leakage Protection Relay (Front-Panel mount)
| TYPE | POWER SUPPLY | SETTINGS | REFERENCE |
|---|---|---|---|
| RH21P | 12 to 24V AC- 12 to 48V DC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56260 |
| 48V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56261 | |
| 110 to 130V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56262 | |
| 220 to 240V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56263 | |
| 380 to 415V AC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56264 | |
| 440 to 525VAC | 30mA-Inst, 300mA-Insta or 300mA-60ms | 56265 | |
| RH99P | 12 to 24V AC- 12 to 48V DC | 30mA to 30A- Inst to 4.5s | 56270 |
| 48V AC | 30mA to 30A- Inst to 4.5s | 56271 | |
| 110 to 130V AC | 30mA to 30A- Inst to 4.5s | 56272 | |
| 220 to 240V AC | 30mA to 30A- Inst to 4.5s | 56273 | |
| 380 to 415V AC | 30mA to 30A- Inst to 4.5s | 56274 | |
| 440 to 525V ac | 30mA to 30A- Inst to 4.5s | 56275 | |
| RHU | 220 to 240V AC | 15mA to 30A- Inst to 5s | 28560(1) |
Then choose a Toroidal to suit:
Vigirex Sensors (Toroidal and rectangular)
| TYPE | DESCRIPTION | DIMENSION | RATED OPERATIONAL CURRENT | REFERENCE |
|---|---|---|---|---|
| Closed Toroid,A-type | TA30 | 30mm | 65A | 50437(2) |
| PA40 | 50mm | 85A | 50438(2) | |
| IA80 | 80mm | 160A | 50439 | |
| MA120 | 120mm | 250A | 50440 | |
| SA200 | 200mm | 400A | 50441 | |
| GA300 | 300mm | 630A | 50442 | |
| Split Toroid, OA-type | POA | 46mm | 85A | 50485 |
| GOA | 110mm | 250A | 50486 | |
| Rectangular Sensors | Small Rectangular Sensors | 280 x 115mm | 1600A | 56053(3) |
| Large Rectangular Sensors | 470 x 160mm | 3200A | 56054(3) |
For further information please visit https://www.se.com/au/en/product-range/1014-vigirex/?parent-subcategory-id=4250