ATV32 single-phase for motor power 2,2 kW

Variable speed drive ATV32, 3P, with heat sink, size 1

Home ProductsIndustrialAltivarVariable speed drive ATV32

Altivar 32, Variable speed drive ATV32, 0.55 kw, 400 V, 3 phase, with heat sink

Item Number: ATV32H055N4

1 PCE 0

Where To Buy

Datasheet

Download

Product Dimensions

Width45 mm

Height325 mm

Depth245 mm

See full specifications

Barcode

Qty	UoM	EAN	Colour
			-
			-
			-

Barcode

Qty	UoM	EAN	Colour
1		3606480299780	-

Specifications

Design

Range of product

Altivar 32

Product or component type

variable speed drive

Product destination

asynchronous motors|synchronous motors

Warranty

18 months

Physical

Function available

Local signalling

1 LED red for drive voltage|1 LED green for CANopen run|1 LED red for CANopen error|1 LED red for drive fault

Supply

internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection

Protection type

input phase breaks: drive|overcurrent between output phases and earth: drive|overheating protection: drive|short-circuit between motor phases: drive|thermal protection: drive

Communication port protocol

CANopen|Modbus

Connector type

1 RJ45 (on front face) for Modbus/CANopen

Width

45 mm

Height

325 mm

Depth

245 mm

Net weight

2.5 kg

Standards

EN 61800-3 environments 1 category C2|EN 55011 class A group 1|EN/IEC 61800-3|EN 61800-3 environments 2 category C2|EN/IEC 61800-5-1

Product certifications

CSA|UL|C-Tick|NOM 117|GOST

Marking

Ip degree of protection

IP20 conforming to EN/IEC 61800-5-1

Relative humidity

5...95 % without condensation conforming to IEC 60068...2-3|5...95 % without dripping water conforming to IEC 60068...2-3

Ambient air temperature for operation

-10...50 °C without derating|50...60 °C with derating factor

Ambient air temperature for storage

-25...70 °C

Others

Product specific application

complex machines

Assembly style

with heat sink

Component name

ATV32

Emc filter

Class C2 EMC filter integrated

Network number of phases

3 phases

[us] rated supply voltage

380...500 V - 15...10 %

Supply voltage limits

323...550 V

Supply frequency

50...60 Hz - 5...5 %

Network frequency

47.5...63 Hz

Motor power kw

0.55 kW at 380...480 V

Motor power hp

0.75 hp at 380...480 V

Line current

2.2 A for 500 V 3 phases 0.55 kW / 0.75 hp|2.8 A for 380 V 3 phases 0.55 kW / 0.75 hp

Apparent power

1.9 kVA at 500 V 3 phases 0.55 kW / 0.75 hp

Prospective line isc

5 kA for 3 phases

Nominal output current

1.9 A at 4 kHz 500 V 0.55 kW / 0.75 hp

Maximum transient current

2.9 A for 60 s 0.55 kW / 0.75 hp

Output frequency

0.0005...0.599 kHz

Nominal switching frequency

4 kHz

Switching frequency

2...16 kHz adjustable

Speed range

1...100 for asynchronous motor in open-loop mode

Speed accuracy

+/- 10 % of nominal slip 0.2 Tn to Tn

Torque accuracy

+/- 15 %

Transient overtorque

170...200 %

Braking torque

<= 170 % with braking resistor

Asynchronous motor control profile

flux vector control without sensor - Energy Saving, NoLoad law|voltage/frequency ratio - Energy Saving, quadratic U/f|voltage/frequency ratio, 2 points|flux vector control without sensor, standard|voltage/frequency ratio, 5 points

Synchronous motor control profile

vector control without sensor

Regulation loop

adjustable PID regulator

Motor slip compensation

not available in voltage/frequency ratio (2 or 5 points)|automatic whatever the load|adjustable 0...300 %

Output voltage

<= power supply voltage

Noise level

43 dB conforming to 86/188/EEC

Insulation

electrical between power and control

Electrical connection

screw terminal, clamping capacity: 0.5...1.5 mm², AWG 18...AWG 14 (control)|removable screw terminals, clamping capacity: 1.5...2.5 mm², AWG 14...AWG 12 (motor/braking resistor)|screw terminal, clamping capacity: 1.5...4 mm², AWG 14...AWG 10 (power supply)

Tightening torque

0.5 N.m, 4.4 lb/ft (control)|0.7 N.m, 7.1 lb/ft (motor/braking resistor)|0.6 N.m, 5.3 lb/ft (power supply)

Analogue input number

Analogue input type

AI1 voltage: 0...10 V DC, impedance: 30000 Ohm, resolution 10 bits|AI2 bipolar differential voltage: +/- 10 V DC, impedance: 30000 Ohm, resolution 10 bits|AI3 current: 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration), impedance: 250 Ohm, resolution 10 bits

Sampling duration

2 ms (AI1, AI2, AI3) - analog input(s)|2 ms (AO1) - analog input(s)

Response time

LI1...LI6 8 ms, tolerance +/- 0.7 ms for logic output(s)|R1A, R1B, R1C 2 ms for relay output(s)|R2A, R2C 2 ms for relay output(s)

Accuracy

+/- 0.2 % (AI1, AI2, AI3) for a temperature of -10...60 °C|+/- 0.5 % (AI1, AI2, AI3) for a temperature of 25 °C|+/- 1 % (AO1) for a temperature of 25 °C|+/- 2 % (AO1) for a temperature of -10...60 °C

Linearity error

+/- 0.2...0.5 % of maximum value (AI1, AI2, AI3)|+/- 0.3 % (AO1)

Analogue output number

Analogue output type

AO1 software-configurable current 0...20 mA, impedance: 800 Ohm, resolution 10 bits|AO1 software-configurable voltage 0...10 V, impedance: 470 Ohm, resolution 10 bits

Discrete output number

Discrete output type

configurable relay logic: (R1A, R1B, R1C) NO/NC - 100000 cycles|configurable relay logic: (R2A, R2B) NO - 100000 cycles|logic: (LO)

Minimum switching current

5 mA at 24 V DC for configurable relay logic

Maximum switching current

R1: 3 A at 250 V AC resistive load, cos phi = 1 |R1: 4 A at 30 V DC resistive load, cos phi = 1 |R1, R2: 2 A at 250 V AC inductive load, cos phi = 0.4 |R1, R2: 2 A at 30 V DC inductive load, cos phi = 0.4 |R2: 5 A at 250 V AC resistive load, cos phi = 1 |R2: 5 A at 30 V DC resistive load, cos phi = 1

Discrete input number

Discrete input type

programmable (sink/source) (LI1...LI4)24...30 V DC, with level 1 PLC|programmable as pulse input 20 kpps (LI5)24...30 V DC, with level 1 PLC|switch-configurable PTC probe (LI6)24...30 V DC|safe torque off (STO)24...30 V DC - 1500 Ohm

Discrete input logic

negative logic (sink) (LI1...LI6), > 19 V (state 0), < 13 V (state 1)|positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)

Acceleration and deceleration ramps

ramp switching|linear|S|CUS|deceleration ramp automatic stop DC injection|U|deceleration ramp adaptation

Braking to standstill

by DC injection

Physical interface

2-wire RS 485 for Modbus

Transmission frame

RTU for Modbus

Type of polarization

no impedance for Modbus

Number of addresses

1...127 for CANopen|1...247 for Modbus

Method of access

slave CANopen

Electromagnetic compatibility

1.2/50 µs - 8/20 µs surge immunity test, level 3 conforming to IEC 61000-4-5|conducted radio-frequency immunity test, level 3 conforming to IEC 61000-4-6|electrical fast transient/burst immunity test, level 4 conforming to IEC 61000-4-4|electrostatic discharge immunity test, level 3 conforming to IEC 61000-4-2|radiated radio-frequency electromagnetic field immunity test, level 3 conforming to IEC 61000-4-3|voltage dips and interruptions immunity test conforming to IEC 61000-4-11

Option card

communication card for CANopen daisy chain|communication card for CANopen open style|communication card for DeviceNet|communication card for EtherNet/IP|communication card for Profibus DP V1

Functionality

mid

Specific application

other applications

Pollution degree

2 conforming to EN/IEC 61800-5-1

Vibration resistance

1 gn (f = 13-200 Hz) conforming to EN/IEC 60068-2-6|1.5 mm peak to peak (f = 3-13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Operating altitude

<= 1000 m without derating|1000...3000 m with current derating 1 % per 100 m

Operating position

vertical +/- 10 degree

Show all specifications

Documents & downloads

hide show

Colour ()

Altivar 32, Variable speed drive ATV32, 0.55 kw, 400 V, 3 phase, with heat sink

Item Number: ATV32H055N4

Colour ()

Datasheet

Product Dimensions

Barcode

Specifications

Design

Physical

Others

Documents & downloads

All

CAD Files and Packs

Technical Data Catalogues

Installation Instruction

Operating Manuals

Certificates (MSDS)

Declaration of Conformity

eTechPub

Software - Data Library

Altivar 32 variable speed drives - Three-phase supply voltage 380…500 V 50/60 Hz, with integrated EMC filter - 3D CAD

Discover catalog for Altivar 32 Variable Speed Drives

Altivar 31, 312, and 32 Motor Cable Installation Guidelines for Baggage Conveyance Applications

Instruction Sheet: China RoHS - Hazardous Substances Table

BMP Synchronous Motor, manual

ATV32: safety integrated functions manual

ATV32 Programming manual

ATV32 Quick Start Guide

ATV32 Quick Start Annex: SCCR

ATV32 PROFINET Manual : VW3A3627

ATV32 communication parameters addresses

ATV32-320-ATEX-CERTIFICATE

ATV32-320_EC_TYPE_EXAMINATION

ATV320 UL CERTIFICATE

ATV32 320 CSA CERTIFICATE

ETHERCAT ATV32 CERTIFICATE-EN

ATV32 C-TICK CERTIFICATE

ATV32 UL CERTIFICATE

ATV32 320B EU DECLARATION

ATV32 & ATV320B UK DECLARATION

ATV320 RCM CERTIFICATE

English

PROFINET GSDML VW3A3627 GSD files

PROFIBUS DP GSD VW3A3607 V1.16 GSD files

Ethernet_EDS_VW3A3616 EDS Files

POWERLINK XDD VW3A3619 EDS Files

EtherCAT ESI file : VW3A3601 EDS Files

ATV32_CANopen_EDS

DeviceNet_EDS_VW3A3609 EDS Files

EtherCAT_ESI_VW3A3601 EDS Files

EtherCAT_ESI_VW3A3601 EDS Files

ATV32_CANopen_EDS

Recently viewed

Altivar 32, Variable speed drive ATV32, 0.55 kw, 400 V, 3 phase, with heat sink

Altivar 32, Variable speed drive ATV32, 0.55 kw, 400 V, 3 phase, with heat sink