Colour ()
- 1 PCE 0
Altivar 12 Variable speed drive ATV12
Item Number: ATV12HU22M2
Colour ()
- 1 PCE 0
Datasheet
For ATV12HU22M2
Barcode
| Qty | UoM | EAN | Colour |
|---|---|---|---|
| 1 | 3606480071102 | - | |
| - | |||
| - |
Barcode
| Qty | UoM | EAN | Colour |
|---|---|---|---|
| 1 | 3606480071102 | - |
Specifications
Design
Range of product
Product or component type
Warranty
Physical
Mounting mode
Communication port protocol
Ip degree of protection
Connector type
Protection type
- line supply overvoltage
- line supply undervoltage
- overcurrent between output phases and earth
- overheating protection
- short-circuit between motor phases
- against input phase loss in three-phase
- thermal motor protection via the drive by continuous calculation of I²t
Quantity per set
Width
Height
Depth
Net weight
Product certifications
- NOM
- CSA
- C-Tick
- UL
- GOST
- RCM
- KC
Marking
Standards
- UL 508C
- UL 618000-5-1
- IEC 61800-5-1
- IEC 61800-3
Relative humidity
- 5...95 % without condensation conforming to IEC 60068...2-3
- 5...95 % without dripping water conforming to IEC 60068...2-3
Ambient air temperature for operation
- -10...50 °C without derating
- 50...60 °C with current derating 2.2 % per °C
Ambient air temperature for storage
Ambient air temperature for operation
China rohs regulation
California proposition 65
Others
Life cycle assessment data
If one of the deliverables is not relevant please give the reason
Substance regulation data deliverable
Package 1 bare product quantity
Package 2 bare product quantity
Product specific application
Design of frequency changer
Supply frequency
[us] rated supply voltage
[us] rated supply voltage
Relative symmetric mains voltage tolerance
Nominal output current
Number of input phases
Number of output phases
Motor power kw
Motor power hp
Emc filter
Motor power hp
Discrete input number
Discrete output number
Analogue input number
Analogue output number
Relay output number
Number of inputs, bidirectional, not potential-free
Number of inputs, potential-free
Computer port
Optical interface present
Physical interface
Continuous output current
Method of access
Speed drive output frequency
Speed range
Sampling duration
- 20 ms, tolerance +/- 1 ms for logic input
- 10 ms for analogue input
Linearity error
Frequency resolution
- analog input: converter A/D, 10 bits
- display unit: 0.1 Hz
Time constant
Transmission rate
- 9.6 kbit/s
- 19.2 kbit/s
- 38.4 kbit/s
Transmission frame
Number of addresses
Data format
Communication service
- read holding registers (03) 29 words
- write single register (06) 29 words
- write multiple registers (16) 27 words
- read/write multiple registers (23) 4/4 words
- read device identification (43)
Type of polarization
Number of hw interfaces parallel
Number of hw interfaces industrial ethernet
Number of hw interfaces profinet
Number of hw interfaces serial rs232
Number of hw interfaces serial rs422
Number of hw interfaces serial rs485
Number of hw interfaces serial tty
Number of hw interfaces usb
Number of hw interfaces other
Supporting protocol for as-interface safety at work
Supporting protocol for asi
Supporting protocol for suconet
Supporting protocol for bacnet
Supporting protocol for can
Supporting protocol for data-highway
Supporting protocol for devicenet
Supporting protocol for devicenet safety
Supporting protocol for ethernet/ip
Supporting protocol for foundation fieldbus
Supporting protocol for interbus
Supporting protocol for interbus-safety
Supporting protocol for knx
Supporting protocol for lon
Supporting protocol for modbus
Supporting protocol for other bus systems
Supporting protocol for profibus
Supporting protocol for profinet cba
Supporting protocol for profinet io
Supporting protocol for profisafe
Supporting protocol for safetybus p
Supporting protocol for sercos
Supporting protocol for tcp/ip
4 quadrant operation possible
Asynchronous motor control profile
- sensorless flux vector control
- quadratic voltage/frequency ratio
- voltage/frequency ratio (V/f)
Maximum output frequency
Transient overtorque
Acceleration and deceleration ramps
- linear from 0 to 999.9 s
- U
- S
Motor slip compensation
- adjustable
- preset in factory
Switching frequency
- 2...16 kHz adjustable
- 4...16 kHz with derating factor
Nominal switching frequency
Braking to standstill
Brake chopper integrated
Maximum associated fuse rating
Line current
- 24.0 A at 100 V (heavy duty)
- 20.2 A at 120 V (heavy duty)
Maximum output voltage
Nominal output power
Apparent power
Maximum transient current
- 15.0 A during 60 s (heavy duty)
- 16.5 A during 2 s (heavy duty)
Capacity of dc link
Network frequency
Relative symmetric network frequency tolerance
Prospective line isc
1 phase low current possible
Base load current at high overload
Application in domestic and commercial area permitted
Application in industrial area permitted
Emc limit value (complied)
Power loss per device current dependent
Power loss static current independent
Power dissipation in w
Housing material
With safety function safely limited speed (sls)
With safety function safe brake management (sbc/sbt)
With safety function safe operating stop (sos)
With safety function safe position (sp)
With safety function safe programmable logic
With safety function safe speed monitor (ssm)
With safety function safe stop 1 (ss1)
With sft fct safe stop 2 (ss2)
With safety function safe torque off (sto)
With safety function safely limited position (slp)
With safety function safe direction (sdi)
Operating element present
Tightening torque
Insulation
Operating altitude
- > 1000...2000 m with current derating 1 % per 100 m
- <= 1000 m without derating
Operating position
Assembly style
Electromagnetic compatibility
- electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4
- electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2
- immunity to conducted disturbances level 3 conforming to IEC 61000-4-6
- radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3
- surge immunity test level 3 conforming to IEC 61000-4-5
- voltage dips and interruptions immunity test conforming to IEC 61000-4-11
Environmental class (during operation)
- class 3C3 according to IEC 60721-3-3
- class 3S2 according to IEC 60721-3-3
Environmental class (during storage)
- class 1C3 according to IEC 60721-3-1
- class 1S2 according to IEC 60721-3-1
Environmental class (during transport)
- class 2C3 according to IEC 60721-3-2
- class 2S1 according to IEC 60721-3-2
Maximum acceleration under shock impact (during operation)
Maximum acceleration under shock load (during storage)
Maximum acceleration under shock load (during transport)
Maximum acceleration under vibratory load (during storage)
Maximum acceleration under vibratory load (during transport)
Maximum acceleration under vibrational stress (during operation)
Maximum deflection under vibratory load (during storage)
Maximum deflection under vibratory load (during transport)
Maximum deflection under vibratory load (during operation)
Volume of cooling air
Overvoltage category
Regulation loop
Electromagnetic emission
- radiated emissions environment 1 category C2 conforming to IEC 61800-3 2...16 kHz shielded motor cable
- conducted emissions with integrated EMC filter environment 1 category C1 conforming to IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m
- conducted emissions with additional EMC filter environment 1 category C1 conforming to IEC 61800-3 4...12 kHz shielded motor cable <20 m
- conducted emissions with additional EMC filter environment 1 category C2 conforming to IEC 61800-3 4...12 kHz shielded motor cable <50 m
- conducted emissions with additional EMC filter environment 2 category C3 conforming to IEC 61800-3 4...12 kHz shielded motor cable <50 m
- conducted emissions with integrated EMC filter environment 1 category C2 conforming to IEC 61800-3 4...16 kHz shielded motor cable <5 m
- conducted emissions with integrated EMC filter environment 1 category C2 conforming to IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <10 m
Vibration resistance
- 1 gn (f = 13-200 Hz) conforming to IEC 60068-2-6
- 1.5 mm peak to peak (f = 3-13 Hz) - drive unmounted on symmetrical DIN rail - conforming to IEC 60068-2-6
Shock resistance
Noise level
Pollution degree
Ambient air transport temperature
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Unit type of package 2
Number of units in package 2
Package 2 height
Package 2 width
Package 2 length
Package 2 weight
Scip number
Packaging made with recycled cardboard
Packaging without single use plastic
Weee
Take-back
Take-back
Product contributes to saved and avoided emissions
Product contributes to saved and avoided emissions
Removable battery
Minimum percentage of recycled plastic content
Documents & downloads
hide show-
All
-
CAD Files and Packs
-
Technical Data Catalogues
-
Installation Instruction
-
Operating Manuals
-
eTechPub
-
Declaration of Conformity
-
Certificates (MSDS)
-
Software - Data Library
ATV12 EU DECLARATION
VERSION
2.0
DATE
26 Jun 2023
REVISION
2.0
ATV12HU22M2_KC_CERTIFICATE
VERSION
1.0
DATE
23 Feb 2024
REVISION
1.0
ATV12 UL CERTIFICATE
VERSION
1.0
DATE
06 Oct 2022
REVISION
1.0
SoMove (FDT Standalone)
VERSION
2.26
DATE
20 Feb 2025
REVISION
2.26
Variable speed drive ATV12 - 1f - 100V/200V Heat sink - 3D CAD
VERSION
1.0
DATE
12 Jan 2022
REVISION
1.0
Altivar 12 Variable speed drives
VERSION
2.0
DATE
02 Aug 2022
REVISION
2.0
Instruction sheet Fan kit: VZ3V1301,302
VERSION
1.0
DATE
12 Dec 2023
REVISION
1.0
1) ATV12 Getting Started
VERSION
3.0
DATE
25 May 2023
REVISION
3.0
ATV12 Variable Speed Drives Extended Short Circuit Ratings - Instructions
VERSION
1.0
DATE
25 May 2023
REVISION
1.0
1) ATV12 Quick Start annex - SCCR
VERSION
4.0
DATE
07 Mar 2023
REVISION
4.0
Instruction sheet - Braking Resistor: VW3A7723, VW3A7724, VW3A7725
VERSION
1.1
DATE
02 Aug 2022
REVISION
1.1
Instruction sheet - substitution ATV11-ATV12
VERSION
1.1
DATE
02 Aug 2022
REVISION
1.1
ATV12 user manual
VERSION
5.0
DATE
04 Jul 2023
REVISION
5.0
ATV12 Modbus Communication Manual
VERSION
2.0
DATE
02 Aug 2022
REVISION
2.0
Altistart 22 (EPDS)
VERSION
2.1
DATE
23 Oct 2024
REVISION
2.1
ATV12 UK DECLARATION
VERSION
1.1
DATE
23 Feb 2024
REVISION
1.1
ATV12 EU DECLARATION
VERSION
2.0
DATE
26 Jun 2023
REVISION
2.0
ATV12HU22M2_KC_CERTIFICATE
VERSION
1.0
DATE
23 Feb 2024
REVISION
1.0
ATV12 UL CERTIFICATE
VERSION
1.0
DATE
06 Oct 2022
REVISION
1.0
SoMove (FDT Standalone)
VERSION
2.26
DATE
20 Feb 2025
REVISION
2.26
Variable speed drive ATV12 - 1f - 100V/200V Heat sink - 3D CAD
VERSION
1.0
DATE
12 Jan 2022
REVISION
1.0
Altivar 12 Variable speed drives
VERSION
2.0
DATE
02 Aug 2022
REVISION
2.0
Instruction sheet Fan kit: VZ3V1301,302
VERSION
1.0
DATE
12 Dec 2023
REVISION
1.0
1) ATV12 Getting Started
VERSION
3.0
DATE
25 May 2023
REVISION
3.0
ATV12 Variable Speed Drives Extended Short Circuit Ratings - Instructions
VERSION
1.0
DATE
25 May 2023
REVISION
1.0
1) ATV12 Quick Start annex - SCCR
VERSION
4.0
DATE
07 Mar 2023
REVISION
4.0
Instruction sheet - Braking Resistor: VW3A7723, VW3A7724, VW3A7725
VERSION
1.1
DATE
02 Aug 2022
REVISION
1.1
Instruction sheet - substitution ATV11-ATV12
VERSION
1.1
DATE
02 Aug 2022
REVISION
1.1
ATV12 user manual
VERSION
5.0
DATE
04 Jul 2023
REVISION
5.0
ATV12 Modbus Communication Manual
VERSION
2.0
DATE
02 Aug 2022
REVISION
2.0
Altistart 22 (EPDS)
VERSION
2.1
DATE
23 Oct 2024
REVISION
2.1
ATV12 UK DECLARATION
VERSION
1.1
DATE
23 Feb 2024
REVISION
1.1
ATV12 EU DECLARATION
VERSION
2.0
DATE
26 Jun 2023
REVISION
2.0
ATV12HU22M2_KC_CERTIFICATE
VERSION
1.0
DATE
23 Feb 2024
REVISION
1.0
ATV12 UL CERTIFICATE
VERSION
1.0
DATE
06 Oct 2022
REVISION
1.0
SoMove (FDT Standalone)
VERSION
2.26
DATE
20 Feb 2025
REVISION
2.26
- Page 1 / 3
- Page 2 / 3
- Page 3 / 3
Instruction sheet Fan kit: VZ3V1301,302
VERSION
1.0
DATE
12 Dec 2023
REVISION
1.0
1) ATV12 Getting Started
VERSION
3.0
DATE
25 May 2023
REVISION
3.0
ATV12 Variable Speed Drives Extended Short Circuit Ratings - Instructions
VERSION
1.0
DATE
25 May 2023
REVISION
1.0
1) ATV12 Quick Start annex - SCCR
VERSION
4.0
DATE
07 Mar 2023
REVISION
4.0
Instruction sheet - Braking Resistor: VW3A7723, VW3A7724, VW3A7725
VERSION
1.1
DATE
02 Aug 2022
REVISION
1.1
Instruction sheet - substitution ATV11-ATV12
VERSION
1.1
DATE
02 Aug 2022
REVISION
1.1
Frequently Asked Questions
hide showWhat is a good source of information for the ATV12?
Looking for ATV12 information
Product Line:
Altivar 12
Environment:
All models and serial numbers
Cause:
Information is needed for installation and programming.
Resolution:
User manual is document number BBV28581. This manual includes instructions for installing the drive, connecting the control wiring, programming and troubleshooting.
https://www.schneider-electric.us/en/download/document/BBV28581/
Related products
DISCONTINUED
GV2ME32
TeSys GV2, Motor circuit breaker, TeSys Deca, 3P, 24 to 32A, thermal magnetic, screw clamp terminals, button control
TeSys Deca, 3P, 24 to 32A, thermal magnetic, screw clamp terminals, button control
DISCONTINUED
LC1D25P7
TeSys D, Contactor, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 230VAC 50/60Hz coil
3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 230VAC 50/60Hz coil
DISCONTINUED
LC1D25B7
TeSys D, Contactor, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 24VAC 50/60Hz coil
3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 24VAC 50/60Hz coil
DISCONTINUED
LC1D25E7
TeSys D, Contactor, 3P(3NO), AC-3/AC-3e, <=440V 25A, 48V AC coil
3P(3NO), AC-3/AC-3e, <=440V 25A, 48V AC coil
DISCONTINUED
LC1D25F7
TeSys D, Contactor, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 110VAC 50/60Hz coil
3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 110VAC 50/60Hz coil
DISCONTINUED
LC1D25M7
TeSys D, Contactor, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 220VAC 50/60Hz coil
3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 220VAC 50/60Hz coil
DISCONTINUED
LC1D25BD
TeSys D, Contactor, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 24VDC coil
3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 24VDC coil
DISCONTINUED
LC1D25ED
TeSys D, Contactor, 3P(3 NO), AC-3/AC-3e,L1766:L1787 0 to 440V, 25A, 48VDC coil
3P(3 NO), AC-3/AC-3e,L1766:L1787 0 to 440V, 25A, 48VDC coil
DISCONTINUED
LC1D25BL
TeSys D, Contactor, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 24VDC low consumption coil
3P(3 NO), AC-3/AC-3e, 0 to 440V, 25A, 24VDC low consumption coil
Recently viewed
DISCONTINUED
ATV12HU22M2
Altivar 12, Variable speed drive ATV12, 2.2kW, 3hp, 200..240V, 1ph, with heat sink
2.2kW, 3hp, 200..240V, 1ph, with heat sink