Specifications
Design
Product brand
Clipsal
Range
Wiser
Product or component type
connected dimmer
Device application
light control
Colour tint
dark grey
Surface finish
matt
Sustainable offer status
Green Premium product
Physical
Device presentation
module
Device mounting
flush
Dimmer type
universal
Load type
LED lamp: 5...100 VA at 230 V AC (RC LED mode)|LED lamp: 5...20 VA at 230 V AC (RL LED mode)|incandescent lamp: 14...200 W at 230 V AC|halogen lamp: 14...150 W at 230 V AC|LV halogen lamps: 14...200 VA at 12 V AC (electronic transformer)|LV halogen lamps: 14...150 VA at 12 V AC (wound transformer)
[ue] rated operational voltage
220...240 V AC 50/60 Hz
Protection type
automatic overload protection|overheating protection|short-circuit protection
Local signalling
programming indication: 1 LED (green/red)
Control type
local control dimming up/down control|local control automatic load detection|remote control by auxiliary push-button on/off switching|remote control by auxiliary push-button dimming up/down control|remote control Wiser App on/off switching|remote control Wiser App dimming up/down control|remote control Wiser App device programming
Communication network type
wireless Zigbee (2.4-2.4 GHz), 2.5 mW at < 50 m
Connections - terminals
screw terminal
Clamping connection capacity
1 x 1.5...2 x 2.5 mm² for solid cable(s)|1 x 1.5...2 x 2.5 mm² for solid stranded cable(s)
Mounting support
wall|installation box
Type of installation
indoor installation
Depth
22 mm
Width
43 mm
Height
43 mm
Eu rohs directive
Compliant with Exemptions
Mercury free
Yes
Rohs exemption information
Yes
China rohs regulation
Product out of China RoHS scope. Substance declaration for your information
Environmental disclosure
ENVPEP1705012
Circularity profile
ENVEOLI1705012
Others
Package 1 bare product quantity
1
Type number
W50100
Concentrator compatibility
Wiser hub generation 1
Mobile app name
Wiser by SE
Standby consumption
max. 0.4 W
Associated fuse rating
16 A
Main colour tint
dark grey
Number of outputs
1
Software name
Wiser App: dimming range control|Wiser App: overtravel control|Wiser App: program the switching time|Wiser App: enable timer mode|Wiser App: management of the dimming mode|Wiser App: enable switch-on brightness/memory function|Wiser App: enable timer mode/overtravel time|Wiser App: upgrade device firmware|Wiser App: load control
Maximum number of connected devices
Bluetooth: 15 (smart device)
System requirements
Android 5.1 or higher Wiser App|Apple iOS 10.3 or higher Wiser App|Bluetooth 4.1 or higher Bluetooth|Wiser Home Touch Wiser Home control
Connected auxiliaries
maximum 10 auxiliary push-buttons, distance : 50 m
Number of loop terminals
2
Shape of screw head
pozidriv No 1 and combi
Unit type of package 1
PCE
Number of units in package 1
1
Package 1 height
5.2 cm
Package 1 width
7.5 cm
Package 1 length
7.5 cm
Package 1 weight
62.0 g
Documents & downloads
hide showFilter items
-
All
-
Environmental Disclosure
-
End of Life Manual
-
Installation Instruction
-
Technical illustration
-
Certificates (MSDS)
Frequently Asked Questions
hide show
No, unfortunately this is not possible as it is a 1 way mechanism. When power is lost to this mechanism it is restored to its off state which can ONLY be triggered by that switch and not an additional switch.
If Multi-way pushbutton dimming is required it is recommended to use the Wiser Micro Dimmer Module and Bell press mechanisms ( CLP5010-0001 and 60PBBP)
This setup allows a short press to turn on and off the dimmer while a long press will ramp up or ramp down the dimmer.( see attached for wiring diagram)
For further information please visit https://www.clipsal.com/products/detail?CatNo=CLP5010-0001&backto=/search?q=CLP&tab-document-1=0&itemno=CLP5010-0001
If Multi-way pushbutton dimming is required it is recommended to use the Wiser Micro Dimmer Module and Bell press mechanisms ( CLP5010-0001 and 60PBBP)
This setup allows a short press to turn on and off the dimmer while a long press will ramp up or ramp down the dimmer.( see attached for wiring diagram)
For further information please visit https://www.clipsal.com/products/detail?CatNo=CLP5010-0001&backto=/search?q=CLP&tab-document-1=0&itemno=CLP5010-0001
When setting up Google home and voice control make sure that any changes that are made to devices in Wiser by SE in the naming of mechs or adding/removing items are done on the device that the speaker is linked within google home. Making sure to refresh the Google Home App after the changes are made in Wiser by SE.
The changes will not be recognized If they are done on a device that is not the creator of the Home within the Google Home App that is linked with the voice control speaker. This can be solved by having the creator refresh his Google Home.
Note: Only one Wiser by SE account should be linked with Google home per household. This person should then create the home within Google Home and add members to this home. If more than one Wiser by SE account in the same home is linked to Google Home this can create ‘doubles’ of the Wiser devices within the Google Home App.
The changes will not be recognized If they are done on a device that is not the creator of the Home within the Google Home App that is linked with the voice control speaker. This can be solved by having the creator refresh his Google Home.
Note: Only one Wiser by SE account should be linked with Google home per household. This person should then create the home within Google Home and add members to this home. If more than one Wiser by SE account in the same home is linked to Google Home this can create ‘doubles’ of the Wiser devices within the Google Home App.
To swap from Bluetooth to Zigbee you will need to short press the mechanism 12 times - and allow time for the device to swap modes, this will take roughly 40 seconds. Initially when swapped to Zigbee mode the LED indicator on the mechanism will flash amber indicating it is in pairing mode. If not paired to after roughly 50 seconds this will become solid amber. This amber indicator will remain on until paired with a Hub, the mechanism will function as normal while this indicator is on.
NOTE: Before swapping from Bluetooth/BLE to Zigbee it is strongly recommended that a factory reset be performed on the mechanism before initiating the change.
NOTE: Before swapping from Bluetooth/BLE to Zigbee it is strongly recommended that a factory reset be performed on the mechanism before initiating the change.
2 way dimming is available in as push button in Saturn Zen
Can be done with 2 X Bell press mechs ( Z4061VH + 60PBBPL )and 1 X Micro Module
See links below for further information:
https://www.clipsal.com/products/detail?CatNo=60PBBPL&tab-document-1=0&itemno=60PBBPL
https://www.clipsal.com/products/detail?CatNo=Z4061VH&tab-document-1=0&itemno=Z4061VH-ZW
https://www.clipsal.com/products/detail?CatNo=CLP5010-0001&tab-document-1=0&itemno=CLP5010-0001
Can be done with 2 X Bell press mechs ( Z4061VH + 60PBBPL )and 1 X Micro Module
See links below for further information:
https://www.clipsal.com/products/detail?CatNo=60PBBPL&tab-document-1=0&itemno=60PBBPL
https://www.clipsal.com/products/detail?CatNo=Z4061VH&tab-document-1=0&itemno=Z4061VH-ZW
https://www.clipsal.com/products/detail?CatNo=CLP5010-0001&tab-document-1=0&itemno=CLP5010-0001