Clipsal - Smoke Alarms Photoelectric Smoke Alarm Surface Mount, 220-240 V a.c. Mains Power w. 9V d.c. Battery Backup
Item Number: 755PSMA4
755PSMA4 Photoelectric smoke alarms helps in early detection of smouldering fires, the most common and highest risk type of fire in homes. It can be used as a single mains powered battery backed (with 9 V d.c.) alarm or can be interconnected with other 755 series smoke alarms to give complete home protection.
Datasheet
Specifications
Design
Range
Product brand
Product or component type
Device application
Physical
Type of packing
Supply
Function available
Control type
Operating distance
Local signalling
Connections - terminals
Type of installation
Device mounting
Mounting support
Fixing mode
Height
Ip degree of protection
Ambient air temperature for operation
Ambient air temperature for storage
Relative humidity
Product certifications
Standards
Reach regulation
Eu rohs directive
Mercury free
Rohs exemption information
China rohs regulation
Environmental disclosure
Circularity profile
Material
Material
Others
Package 1 bare product quantity
Electronic sensor type
[us] rated supply voltage
Battery life
Output voltage limits
Type of alarms
Detection type
Number of devices
Response time
Noise level
Time delay range
Diameter
Unit type of package 1
Number of units in package 1
Package 1 height
Package 1 width
Package 1 length
Package 1 weight
Take-back
Product contributes to saved and avoided emissions
Removable battery
Carbon footprint (kg.eq.co2 per cr, total life cycle)
Documents & downloads
hide show-
All
-
Product Brochures
-
Other technical guide
-
Installation Instruction
-
End of Life Manual
-
Environmental Disclosure
-
Operating Manuals
-
Certificates (MSDS)
755RB Smoke Alarm Mounting Base Instructions
VERSION
1.0
DATE
29 Feb 2024
REVISION
1.0
Smoke Alarms - General Information
VERSION
1.0
DATE
29 Sep 2023
REVISION
1.0
755PSMA2 Smoke Alarm Instructions
VERSION
1.0
DATE
02 Aug 2022
REVISION
1.0
755PSMA4 Smoke Alarm Instructions
VERSION
1.0
DATE
02 Aug 2022
REVISION
1.0
Frequently Asked Questions
hide showSome of the key features are:
- New look design with easy to use test/hush button
- Easy installation and maintenance
- Wired interconnect feature (up to 40 alarms)
- Optional relay or wireless interconnect bases
- Robust digital design
For further information please visit https://www.clipsal.com/search?q=755PSMA
Please follow the regular maintenance check to avoid this.
Vacuum the smoke alarms using a soft brush attachment-
Keeping your smoke alarm free of dust particles, dirt, kitchen grease or cobwebs will help you reduce false alarms and ensure any smoke can easily reach the internal sensing chamber.
Clean and wipe down around unit-
Clean around the smoke alarm unit and remove any insects or other contamination which may have occurred. Spray bug repellent on a cloth and wipe the ceiling around the smoke alarm to act as a future bug deterrent. Clean every 3-6 months to mitigate insect ingress.
ALWAYS TEST THE SMOKE ALARM AFTER CLEANING.
Attached is the Clipsal smoke alarm troubleshooting guide for more info.
Each terminal can accommodate 2 X 1.5mm2 cables
See attached letter referring to minimum wiring size.
See link for further product information: https://www.clipsal.com/products/detail?CatNo=755PSMA4&backto=/search?q=755PSMA4&tab-document-1=0&itemno=755PSMA4
Replace the 9 V d.c. battery with a new one. (It is recommended to replace the battery annually)
To snooze a low battery beep for 10 hours, press the Test/Hush button for 3 seconds.
And if the smoke alarm continues to beep once every 40 seconds after a new battery replacement,
- Unclip the alarm from the base.
- Remove the new battery.
- Press and hold the test button for 20 seconds.
- Replace the new battery and clip it back to the base.
Range
Clipsal's Fire Tek range helps protect the most valuable assets; family, friends and the home.
They are backed by the SAI Global 5 ticks certification of quality, offering robust designs for reliability, ensuring early detection and warning from hazardous smoke and fire.
The Australian Building Code mandates all new homes must have AS3786:2014 compliant smoke alarms installed, interconnected and hard wired to mains power.
By having Fire Tek's smoke alarms installed, you will have the best chance of escaping the devastating effects of a house fire.