Home ProductsIndustrialAltivarVariable speed drive ATV312

Altivar 312, Variable speed drive ATV312, 3kW, 7.1kVA, 125 W, 380..500 V, 3-phase supply

Item Number: ATV312HU30N4

1 PCE 0

Where To Buy

Datasheet

Download

Product Dimensions

Width142 mm

Height184 mm

Depth152 mm

See full specifications

Barcode

Qty	UoM	EAN	Colour
			-
			-
			-

Barcode

Qty	UoM	EAN	Colour
1		3606480077630	-

Specifications

Design

Range of product

Altivar 312

Product or component type

variable speed drive

Product destination

asynchronous motors

Sustainable offer status

Green Premium product

Warranty

18 months

Physical

Supply

internal supply for logic inputs: 19...30 V 100 mA, protection type: overload and short-circuit protection|internal supply for reference potentiometer (2.2 to 10 kOhm): 10...10.8 V 10 mA, protection type: overload and short-circuit protection

Communication port protocol

CANopen|Modbus

Ip degree of protection

IP20 on upper part without cover plate|IP21 on connection terminals|IP31 on upper part|IP41 on upper part

Protection type

input phase breaks: drive|line supply overvoltage and undervoltage safety circuits: drive|line supply phase loss safety function, for three phases supply: drive|motor phase breaks: drive|overcurrent between output phases and earth (on power up only): drive|overheating protection: drive|short-circuit between motor phases: drive|thermal protection: motor

Insulation resistance

>= 500 mOhm 500 V DC for 1 minute

Local signalling

1 LED (red) for drive voltage|four 7-segment display units for CANopen bus status

Connector type

1 RJ45 for Modbus/CANopen

Marking

Height

184 mm

Width

142 mm

Depth

152 mm

Net weight

3.1 kg

Standards

IEC 61800-5-1|IEC 61800-3

Product certifications

DNV|UL|C-Tick|NOM|CSA|GOST

Relative humidity

5...95 % without condensation conforming to IEC 60068...2-3|5...95 % without dripping water conforming to IEC 60068...2-3

Ambient air temperature for storage

-25...70 °C

Ambient air temperature for operation

-10...50 °C without derating (with protective cover on top of the drive)|-10...60 °C with derating factor (without protective cover on top of the drive)

Eu rohs directive

Pro-active compliance (Product out of EU RoHS legal scope)

Mercury free

Yes

Rohs exemption information

Yes

China rohs regulation

Environmental disclosure

ENVPEP110706EN

Circularity profile

ENVEOLI100203EN

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Package 1 bare product quantity

Product specific application

simple machine

Assembly style

with heat sink

Component name

ATV312

Motor power kw

3 kW

[us] rated supply voltage

380...500 V - 15...10 %

Supply frequency

50...60 Hz - 5...5 %

Network number of phases

3 phases

Line current

10.9 A at 380 V, Isc = 5 kA|8.3 A at 500 V

Emc filter

integrated

Apparent power

7.1 kVA

Maximum transient current

10.7 A for 60 s

Power dissipation in w

125 W at nominal load

Speed range

1...50

Asynchronous motor control profile

sensorless flux vector control with PWM type motor control signal|factory set : constant torque

Electrical connection

Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6 terminal 2.5-2.5 mm² AWG 14|L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 5-5 mm² AWG 10

Option card

communication card for CANopen daisy chain|communication card for DeviceNet|communication card for Fipio|communication card for Modbus TCP|communication card for Profibus DP

Supply voltage limits

323...550 V

Prospective line isc

5 kA

Continuous output current

7.1 A at 4 kHz

Output frequency

0...500 Hz

Nominal switching frequency

4 kHz

Switching frequency

2...16 kHz adjustable

Transient overtorque

170...200 % of nominal motor torque

Braking torque

150 % during 60 s with braking resistor|100 % with braking resistor continuously|150 % without braking resistor

Regulation loop

frequency PI regulator

Motor slip compensation

adjustable|automatic whatever the load|suppressable

Output voltage

<= power supply voltage

Tightening torque

Al1, Al2, Al3, AOV, AOC, R1A, R1B, R1C, R2A, R2B, LI1...LI6: 0.6...0.6 N.m|L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-: 1.2...1.2 N.m

Insulation

electrical between power and control

Analogue input number

Analogue input type

AI1 configurable voltage 0...10 V, input voltage 30 V max, impedance: 30000 Ohm|AI2 configurable voltage +/- 10 V, input voltage 30 V max, impedance: 30000 Ohm|AI3 configurable current 0...20 mA, impedance: 250 Ohm

Sampling duration

AI1, AI2, AI3: 8 ms analog|LI1...LI6: 4 ms discrete

Response time

AOV, AOC 8 ms for analog|R1A, R1B, R1C, R2A, R2B 8 ms for discrete

Linearity error

+/- 0.2 % for output

Analogue output number

Analogue output type

AOC configurable current: 0...20 mA, impedance: 800 Ohm, resolution: 8 bits|AOV configurable voltage: 0...10 V, impedance: 470 Ohm, resolution: 8 bits

Discrete input logic

logic input not wired (LI1...LI4), < 13 V (state 1)|negative logic (source) (LI1...LI6), > 19 V (state 0)|positive logic (source) (LI1...LI6), < 5 V (state 0), > 11 V (state 1)

Discrete output number

Discrete output type

configurable relay logic: (R1A, R1B, R1C) 1 NO + 1 NC - 100000 cycles|configurable relay logic: (R2A, R2B) NC - 100000 cycles

Minimum switching current

R1-R2 10 mA at 5 V DC

Maximum switching current

R1-R2: 2 A at 250 V AC inductive load, cos phi = 0.4 and L/R = 7 ms|R1-R2: 2 A at 30 V DC inductive load, cos phi = 0.4 and L/R = 7 ms|R1-R2: 5 A at 250 V AC resistive load, cos phi = 1 and L/R = 0 ms|R1-R2: 5 A at 30 V DC resistive load, cos phi = 1 and L/R = 0 ms

Discrete input number

Discrete input type

(LI1...LI6) programmable at 24 V, 0-100 mA for PLC, impedance: 3500 Ohm

Acceleration and deceleration ramps

linear adjustable separately from 0.1 to 999.9 s|S, U or customized

Braking to standstill

by DC injection

Time constant

5 ms for reference change

Frequency resolution

analog input: 0.1...100 Hz|display unit: 0.1 Hz

Physical interface

RS485 multidrop serial link

Transmission frame

RTU

Transmission rate

10, 20, 50, 125, 250, 500 kbps or 1 Mbps for CANopen|4800, 9600 or 19200 bps for Modbus

Number of addresses

1...127 for CANopen|1...247 for Modbus

Number of drive

127 for CANopen|31 for Modbus

Operating position

vertical +/- 10 degree

Outer dimension

402 x 239 x 192 mm|184 x 140 x 150 mm|215 x 185 x 158 mm

Network frequency

47.5...63 Hz

Dielectric strength

2410 V DC between earth and power terminals|3400 V AC between control and power terminals

Electromagnetic compatibility

1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5|electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4|electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2|radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3

Pollution degree

Protective treatment

Vibration resistance

1 gn (f= 13-150 Hz) conforming to EN/IEC 60068-2-6|1.5 mm (f= 3-13 Hz) conforming to EN/IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to EN/IEC 60068-2-27

Operating altitude

<= 1000 m without derating|1000...3000 m with current derating 1 % per 100 m

Unit type of package 1

PCE

Number of units in package 1

Package 1 height

21.365 cm

Package 1 width

21.544 cm

Package 1 length

21.72 cm

Package 1 weight

3.149 kg

Unit type of package 2

S06

Number of units in package 2

Package 2 height

73.5 cm

Package 2 width

60.0 cm

Package 2 length

80.0 cm

Package 2 weight

48.0 kg

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Product contributes to saved and avoided emissions

Show all specifications

Documents & downloads

hide show

Colour ()

Altivar 312, Variable speed drive ATV312, 3kW, 7.1kVA, 125 W, 380..500 V, 3-phase supply

Item Number: ATV312HU30N4

Colour ()

Datasheet

Product Dimensions

Barcode

Specifications

Design

Physical

Others

Documents & downloads

All

CAD Files and Packs

Technical Data Catalogues

Installation Instruction

End of Life Manual

Operating Manuals

Certificates (MSDS)

Declaration of Conformity

Software - Data Library

Altivar 312 - Variable speed drive, single-phase three-phase supply voltage: voltage 200…240V / 380…500V, 50/60Hz, with integrated EMC filter - 3D CAD

Discover catalogue for Altivar 312 variable speed drives

Remote Keypad for Altivar 312 and 320 Drives Installation Instructions

Altivar 31, 312, and 32 Motor Cable Installation Guidelines for Baggage Conveyance Applications

Remote Keypad for Altivar™ 312 and 320 Drives Instruction Sheet

Instruction Sheet: China RoHS - Hazardous Substances Table

ALTIVAR 312 0.18 - 15 kW, Product End-of-Life Instructions

1) ATV312 getting Started

ATV312 to ATV320 Migration Manual

Getting started with ATV312 - User Guide

1) ATV312 Getting Stated Annex : SCCR

3) ATV312 programming manual

2_ATV312 Installation Manual

ATV312 PROFIBUS DP communication manual

ATV312 CANopen manual

ATV312 DeviceNet manual

ATV31 312 UL CERTIFICATE

ATV312 C-TICK CERTIFICATE

ATV312 EU DECLARATION

SoMove (FDT Standalone)

Recently viewed

Altivar 312, Variable speed drive ATV312, 3kW, 7.1kVA, 125 W, 380..500 V, 3-phase supply

Altivar 312, Variable speed drive ATV312, 3kW, 7.1kVA, 125 W, 380..500 V, 3-phase supply