Home ProductsIndustrialAltistartSoft starter

Altistart 22 Soft starter

Item Number: ATS22C59Q

1 PCE 0

Retail

N/A

RRP (Inc. GST)

Where To Buy

Datasheet

For ATS22C59Q

Download

Product Dimensions

Width304 mm

Height455 mm

Depth339.7 mm

See full specifications

Barcode

Qty	EAN	Colour
1	3606480211300	-
		-
		-

Barcode

Qty	UoM	EAN	Colour
1		3606480211300	-

Specifications

Design

Range of product

Altistart 22

Product or component type

soft starter

Product destination

asynchronous motors

Warranty

18 months

Physical

Ip degree of protection

IP00

Function available

internal bypass

Output current

0.4...1 Icl adjustable

Communication port protocol

Modbus

Connector type

1 RJ45

Protection type

phase failure: line
thermal protection: motor
thermal protection: starter

Marking

Height

455 mm

Width

304 mm

Depth

339.7 mm

Net weight

50 kg

Standards

IEC 60947-4-2

Product certifications

UL
CCC
C-Tick
CSA
GOST

Relative humidity

0...95 % without condensation or dripping water conforming to IEC 60068...2-3

Ambient air temperature for operation

-10...40 °C (without derating)
40...60 °C (with current derating 2.2 % per °C)

Ambient air temperature for storage

-25...70 °C

China rohs regulation

California proposition 65

WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Others

Life cycle assessment data

If one of the deliverables is not relevant please give the reason

End of commercialization (planned, announced or effective)

Substance regulation data deliverable

Yes

Package 1 bare product quantity

Product specific application

pumps and fans

Component name

ATS22

Network number of phases

3 phases

[us] rated supply voltage

230...440 V - 15...10 %

Motor power kw

160 kW 230 V
315 kW 400 V
355 kW 440 V

Factory setting current

560 A

Power dissipation in w

251 W for standard applications

Utilisation category

AC-53A

Type of start

start with torque control (current limited to 3.5 In)

Icl starter rating

590 A for connection in the motor supply line for standard applications

Assembly style

with heat sink

Supply voltage limits

195...484 V

Supply frequency

50...60 Hz - 10...10 %

Network frequency

45...66 Hz

Device connection

to the motor delta terminals
in the motor supply line

[uc] control circuit voltage

230 V - 15...10 % 50/60 Hz

Control circuit consumption

20 W

Discrete output number

Discrete output type

relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O

Minimum switching current

100 mA at 12 V DC (relay outputs)

Maximum switching current

5 A 250 V AC resistive 1 relay outputs
5 A 30 V DC resistive 1 relay outputs
2 A 250 V AC inductive 0.4 20 ms relay outputs
2 A 30 V DC inductive 7 ms relay outputs

Discrete input number

Discrete input type

(LI1, LI2, LI3) logic, 5 mA 4.3 kOhm

Discrete input voltage

24 V <= 30 V

Discrete input logic

positive logic LI1, LI2, LI3 at State 0: < 5 V and <= 2 mA at State 1: > 11 V, >= 5 mA

Ptc probe input

750 Ohm

Communication data link

serial

Physical interface

RS485 multidrop

Transmission rate

4800, 9600 or 19200 bps

Installed device

Type of cooling

forced convection

Operating position

vertical +/- 10 degree

Power range

110...220 kW at 200...240 V 3 phases
250...500 kW at 380...440 V 3 phases

Motor starter type

soft starter

Electromagnetic compatibility

conducted and radiated emissions level A conforming to IEC 60947-4-2
damped oscillating waves level 3 conforming to IEC 61000-4-12
electrostatic discharge level 3 conforming to IEC 61000-4-2
immunity to electrical transients level 4 conforming to IEC 61000-4-4
immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3
voltage/current impulse level 3 conforming to IEC 61000-4-5

Vibration resistance

1 gn (f= 13-200 Hz) conforming to IEC 60068-2-6
1.5 mm (f= 2-13 Hz) conforming to IEC 60068-2-6

Shock resistance

15 gn for 11 ms conforming to IEC 60068-2-27

Noise level

56 dB

Pollution degree

level 2 conforming to IEC 60664-1

Operating altitude

<= 1000 m without derating
> 1000...< 2000 m with current derating of 2.2 % per additional 100 m

Unit type of package 1

PCE

Number of units in package 1

Package 1 height

40.000 cm

Package 1 width

53.000 cm

Package 1 length

57.000 cm

Package 1 weight

40.000 kg

Packaging made with recycled cardboard

Packaging without single use plastic

Scip number

74d74380-6cb3-4414-bfb8-7b8212ccd88c

Weee

The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins

Take-back

Product contributes to saved and avoided emissions

Removable battery

N/A

Minimum percentage of recycled plastic content

Show all specifications

Documents & downloads

hide show

Colour ()

Altistart 22 Soft starter

Item Number: ATS22C59Q

Colour ()

Datasheet

Product Dimensions

Barcode

Specifications

Design

Physical

Others

Documents & downloads

All

CAD Files and Packs

Technical Data Catalogues

Installation Instruction

End of Life Manual

Operating Manuals

Certificates (MSDS)

eTechPub

Declaration of Conformity

Software - Data Library

Altistart 22 soft start - soft stop unit - Three-phase power supply - Connection to the motor's power supply line - 3D CAD

Catalog: Soft start/soft stop units Altistart 22

Seismic Qualification of Enclosed Drives and Soft Starters Instruction Bulletin

Altistart 22 Soft Starters in Motor Control Centers - Installation Instructions

Enclosed Altistart 22 Solid State Reduced Voltage Combination Motor Controller Instruction Bulletin

ATS22 - Quick Start guide

Altistart 22 soft start - soft stop unit - Three-phase power supply - Connection to the motor's power supply line - 3D CAD

Catalog: Soft start/soft stop units Altistart 22

Seismic Qualification of Enclosed Drives and Soft Starters Instruction Bulletin

Altistart 22 Soft Starters in Motor Control Centers - Installation Instructions

Enclosed Altistart 22 Solid State Reduced Voltage Combination Motor Controller Instruction Bulletin

ATS22 - Quick Start guide

ALTISTART 22, 110 – 315 kW, Product End-of-Life Instructions

1) ATS22 - Quick Start ANNEX for UL 508 market

ATS22 Soft Starter User Manual

ATS22C48-C59 CCC CERTIFCATE

Altistart 22, Certificate, UL

ATS22_ABS_WUXI_CERTIFICATE

ATS22 ABS BATAM CERTIFICATE

ATS22 UL CERTIFICATE

ATS22 CSA CERTIFICATE

Altistart 22 (EPDS)

ATS22_UK_DECLARATION

ATS22 EU DECLARATION

SoMove (FDT Standalone)

Altistart DTM Library (ATS22 & ATS48)

Recently viewed

Altistart 22, Soft starter, ATS22 control 220V power 230V(160kW)/400V(315kW)/440V(355kW)

TeSys D, Contactor, TeSys Deca, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 50A, 48VAC 50/60Hz coil

Clipsal - 56 Series, Switched Socket Outlet, 250V, 15A, 3 Flat PIN, IP66, 1 Pole, ICOM Controls

TeSys D, Contactor, TeSys Deca, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 50A, 110VAC 50/60Hz coil

Altistart 22, Soft starter, ATS22 control 220V power 230V(160kW)/400V(315kW)/440V(355kW)

TeSys D, Contactor, TeSys Deca, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 50A, 48VAC 50/60Hz coil

Clipsal - 56 Series, Switched Socket Outlet, 250V, 15A, 3 Flat PIN, IP66, 1 Pole, ICOM Controls

TeSys D, Contactor, TeSys Deca, 3P(3 NO), AC-3/AC-3e, 0 to 440V, 50A, 110VAC 50/60Hz coil